Windows 10: Bad configuration

Hello.
1. I installed wmvare, i think i added bad cpu setup or something, restarted pc
2. Pc gave error bad configuration BSOD 2 times
3. I entered in advanced recovery option then at command prompt i wrote
A. Bootrec /fixmbr
B. Bootrec /fixboot
C . Bcdedit /export C:\BCD_Backup
But at this stage i got this error:
The store operation failed
The requested system device cannot be found


Untill now I did not use any usb, but the built in windows blue help screen.

But since this error my c hard drive seems not detected by windows, only by bios, in command prompt all my other drives show, mu d drive became c and so on. I checked all logucal drives, my original c with windows in it does not show up.
Also using bootrec /scanos says i have 0 windows installations, but i think it s again because my original drive c is not detected since i used the 2 command above.

Another weird thing:
If i use disklist, i get disk 0 , my original c drive and got is not checked, and says free space same as total space but i did not wipe the drive wth.

I used diskpart, disk 0 , shows as not being gpt disk but normal mbr , but if i show volumes with diskpart, it does not show, only the other hard disks. Im bios cmode is on, secure boot of and legacy bios os.

Also in bios its shown as bootable drive, but when i restart pc it always goes straight into bios after.

Can anyone help, i m dying here

:)

 

is there any demand for a system configurator?

Processor(V) <--drop down arrow
-AMD(V)
--Socket(V)
---AM2(V)
----List of cpu's
---939(V)
----List of CPU's
-Intel(V)
--Socket(V)
---775(V)
----List of cpu's
---771(V)
----List of CPU's


etc etc.

 

Need Serious Help: How To Record Video of What is Done on my PC?

I suggest the following simple steps:

1. Set the autosave options in MS Office to a low value say 5 minutes.
2. Setup file history to autosave frequently - the shortest period is 5 mins
3. Install Macrium Reflect Free and configure it to do a daily incremental system backup

You should be well covered if you do the above to protect your key files.

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs