Windows 10: BCDedit and multiboot issues

Win10-1903

I am running this multiboot setup for several years. The machine has SSD #1 and SSD #2, which are Win10 and a clone of Win10.

I ran EasyBCD to create boot entires. However when I boot, I have issues. I have to go into BIOS and adjust the boot option #1 to a certain entry and then #1 selection works. However, #2 doesn't. When I go into BIOS and select an entry for #2 disk, #1 no longer works. Why can't they work together, out of the 2 bootable disks, only one or the other can be used at the same time. but not both. Seems when I configure boot entry #2, it messes up Boot entry #1, how is that possible?

This what bcdedit looks like. C: is the primary Win10 and G: is the clone.



Windows Boot Manager

--------------------

identifier {bootmgr}

description Windows Boot Manager

locale en-US

inherit {globalsettings}

default {current}

resumeobject {34222f3b-2d98-11e9-9e5a-d8cb8aefea8e}

displayorder {2e2e25a7-b0e8-11e9-9f42-806e6f6e6963}

{5bca99d5-b0ef-11e9-9f45-806e6f6e6963}

{5bca99d7-b0ef-11e9-9f45-806e6f6e6963}

{2c4a7087-b01b-11e9-9f39-806e6f6e6963}

{56bfddc0-af31-11e9-9f30-806e6f6e6963}

{2e2e25a9-b0e8-11e9-9f42-806e6f6e6963}

{current}

{34222f4b-2d98-11e9-9e5a-d8cb8aefea8e}

toolsdisplayorder {memdiag}

timeout 9

displaybootmenu Yes




Windows Boot Loader

-------------------

identifier {current}

device partition=C:

path \WINDOWS\system32\winload.efi

description Windows 10

locale en-US

inherit {bootloadersettings}

recoverysequence {34222f3e-2d98-11e9-9e5a-d8cb8aefea8e}

displaymessageoverride Recovery

recoveryenabled Yes

isolatedcontext Yes

allowedinmemorysettings 0x15000075

osdevice partition=C:

systemroot \WINDOWS

resumeobject {34222f3b-2d98-11e9-9e5a-d8cb8aefea8e}

nx OptIn

bootmenupolicy Standard




Windows Boot Loader

-------------------

identifier {34222f4b-2d98-11e9-9e5a-d8cb8aefea8e}

device partition=G:

path \Windows\system32\winload.efi

description Windows 10 clone 08_04_19

locale en-US

osdevice partition=G:

systemroot \Windows

resumeobject {e0058cd2-b620-11e9-9f4a-806e6f6e6963}

:)

 

bcdedit worked for me

Topgundcp...
Hi,

I have the exact issue posted (Stuck in safe mode, password doesn't work) where you had suggested getting Rescue6.1.1023x64.iso on a google drive. That link is not good at this time. Was that just a standard Windows 10 64b image or something different. If different, is it still available? If so, where please? If it's just a windows 10 image I can try to find elsewhere... is the 'bcdedit' something on the standard windows image?

Much appreciated,

 

Win 10 multiboot

I get the multiboot menu, but any keystroke (arrow or enter) locks up the machine. ESC restarts OK. If I allow the timeout, it boots normally. I can only access the alternate OS by changing the default via BCDEdit (or EasyBCD).

I've tried various repair/reset sequences without success.

????

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.