Windows 10: biometric validity not working

im using HP pavilion dv6-6150us. At first my fingerprint sensor was working correctly with windows 10 build 1703.

After i clean installed windows 10 build 1803, my fingerprint doesn't work anymore. i have installed 1809 and its the same problem.

i check device manager and i had this error "This device cannot start. (Code 10). The specified request is not a valid operation for the target device."


my fingerprint is : Validity sensor(WBF) PID=0018


in 1703, after installing the fingerprint setup, i would directly show in device manager but with 1803 and 1809 i have to add legacy devices

before it shows in device manager and after that i get the error...


i have updated it using device manager itself but i still get the error.

so i want to know if microsoft has stopped supporting my fingerprint?

:)

 

biometric devices

Hi,

Thank you for posting your query on Microsoft Community.

I understand your inconvenience. We will assist you to resolve this issue.

I suggest you to follow the methods provided below and check if it helps.

Method 1: Enable Biometric option.

I suggest you to enable the Biometrics to pick up the Biometrics setting. This option shall be enable by default. However, I recommend you to follow the steps provided below and check if it enable or not.

• Press Windows logo key + R key.
• Type gpedit.msc and press
  Enter key.
• Under Computer Configuration, navigate to.

Administrative Templates Windows Components Biometrics

In the left hand panel of the Windows, double click on the following:

• Allow the use of biometrics
• Allow users to log on using biometrics

Select enable option and click on Apply and
OK button.

Now, restart your computer and follow the instructions provided below.

After restarting the computer, I suggest you to disconnect and reconnect the fingerprint sensor device and check if the drivers are getting detected in Device Manager. If the issue still persist, follow method 2.

Method 2: Reinstall drivers and compatibility mode.

I suggest you to download and install the latest drives for fingerprint sensor device from the manufacture’s website and check if it gets detected.

If the issue still persist, you may also install the drivers in compatibility mode and check.

Follow the steps to install the drivers in compatibility mode.

• Download the drivers from the manufacturer’s website.
• Right-click on the installer and click on "Properties".
• Click on the ‘compatibility’ tab and check the box "Run this program in compatibility mode for” and select previous Operating System from the drop down.
• Click on ‘Apply’ and click ‘OK’ and run the file to install it.

After installing the drivers in compatibility mode, follow the method 3 and check if you are able to get the sign in option with Biometric.

Method 3:

• Press Windows logo key + I key.
• Click on Accounts.
• Go to Sign in options.
• The fingerprint option will always be visible if there is a WBF-supported fingerprint reader (and its associated driver) installed on the computer.

For more information, refer the following Microsoft help article.

Biometric Devices

Biometric Devices (Windows Drivers)

Hope it helps. Do let us know if your issue is resolved. For any further query, feel free to contact us.

Thank you.

 

i need a biometric driver that can work on windows 7

Hi jasope,

Feel free to check out this link for steps on how to automatically get recommended
drivers and updates for your hardware. Just make sure that your Biometric devices are connected properly before doing these troubleshooting steps.

If the auto update fails, I suggest reaching out to the Biometrics device support website to get assistance in downloading the proper driver.

All the best.

 

How to change from Microsoft a/c logon to biometric fingerprint logon

Hi Vince,

Thank you for posting your query in Microsoft Community.

I suggest you to enable the Biometrics to pick up the Biometrics setting. This option shall be enable by default. However, I recommend you to follow the steps provided below and check if it enable or not.

• Press Windows logo key + R key.
• Type gpedit.msc and press Enter key.
• Under Computer Configuration, navigate to.

Administrative Templates Windows Components Biometrics

In the left hand panel of the Windows, double click on the following:

• Allow the use of biometrics
• Allow users to log on using biometrics

Select enable option and click on Apply and
OK button.

Now, restart your computer and follow the instructions provided below.

After restarting the computer, I suggest you to disconnect and reconnect the fingerprint sensor device and check if the drivers are getting detected in Device Manager.

• Press Windows logo key + I key.
• Click on Accounts.
• Go to Sign in options.
• The fingerprint option will always be visible if there is a WBF-supported fingerprint reader (and its associated driver) installed on the computer.

For more information, refer the following Microsoft help article.

Biometric Devices

Biometric Devices (Windows Drivers)



Hope this information is helpful.