Windows 10: Boot up failure

Hi,

My laptop won't boot up, I did an update yesterday, it got interrupted when updating as the battery died, after that I accidently selected to undo the update, and that's when it started going funny.

My sister turned it off after a few hours, and it's still continuing not loading.

It loads up the acer screen then goes to black screen, undoing updates, then black and goes back to acer screen and repeat.

Trying to boot into safe mode doesn't work, holding down shift, f2, f5?, f8, nothing working, tried all suggested, all it does is that continuous loop.

Any help would be appreciated, thanks.

:)

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

Confusing Disk Boot Failure

Well, Brand new Harddrive the western digital se16 caviar 640. Had a clean install, and while installing drivers and programs after a couple restarts I am receiving disk boot failure. Not the first restart or the second. Each time that it has given me the failure was after installing updates. I've system restored to before installing the updates and it works fine. It's a large list of around 38 or so updates. Granted may be a fluke but anyone heard of this?



P5N-E SLi
E6420
OCZ Platinum 2 x 1 kit
WD 640gb

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.