Windows 10: Booting Issues

Recently, I bought an SSD and installed it into my PC. I cloned everything from my old HDD to the SSD as I wanted to use the SSD as my main storage drive instead of the hard drive. I then booted from the SSD, and everything appeared to be working properly. Wanting the extra space on my PC, I cleared the hard drive by removing all of the partitions and powered off the PC, although when I shut it down, it kept going back to the Welcome Screen instead of shutting the computer down, and it took multiple attempts to get the computer to finally shut down.When I switched the PC back on again, I g

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.