Windows 10: BSOD, 2 different codes

Discus and support BSOD, 2 different codes in Windows 10 BSOD Crashes and Debugging to solve the problem; I bought a new computer a month ago (spec on my profile). There were no problems. But 2 days ago i had a first BSOD. And since then i ve had a lot.... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by raver1509, Aug 10, 2019.

  1. raver1509 Win User

    BSOD, 2 different codes


    I bought a new computer a month ago (spec on my profile). There were no problems. But 2 days ago i had a first BSOD. And since then i ve had a lot. Firstly the only code was MEMORY_MANAGEMENT but then came also CRITICAL_STRUCTULE_CORRUPT . I want to add that when i type sfc /scannow in cmd it says there are corrupt files it can't repair. Below links to dump files of both BSOD codes.
    http://www.mediafire...250-01.dmp/file MEMORY_MANAGEMENT

    http://www.mediafire...019-8484-01.dmp CRITICAL_STRUCTURE_CORRUPITON

    :)
     
    raver1509, Aug 10, 2019
    #1
  2. cplpro Win User

    7 different BSoD

    Hey guys,

    I have a serious problem. I make it as short as possible:

    • system runs 100 % fine with the 10.12
    • updatet to Catalyst 11.1 -> BSoD
    • updatet to 11.1 Hotfix -> BSoD
    • rollback to 10.12 -> BSoD
    • removed ALL AMD files manually, installed 10.12 -> BSoD
    • Temps are fine
    • no sfc /scannow errors
    • no chkdsk errors
    • Prime, Furmark all fine
    • regardless what driver I install -> BSoD
    • I did no hw changes, no OC
    Here are my BSoDs I receive:
    • 0x0000010e
    • 0x1000007e
    • 0x0000007e
    • 0x0000004e
    • 0x0000003b
    • dxgmms1.sys
    • PFN_LIST_CORRUPT
    They all refer to the GPU of course ...

    From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
    Apparently the 11.1 damaged my system irreparable.

    Any advice or info would be very much appreciated *Smile BSOD, 2 different codes :)
     
    cplpro, Aug 10, 2019
    #2
  3. philc43 Win User
    BSOD during gaming, plethora of different error codes!


    Hello and welcome to TenForums BSOD, 2 different codes :)

    The log files that you provided only show one crash dump file so there is not a lot of information to go on. Furthermore the bugcheck code is not one I have ever seen before!

    The stack recorded in the dump includes some references to storage and the analysis suggests memory corruption and so with nothing else to go on I would suggest that you do a check on the hard disk and RAM. This maybe the same as you have already run but it would be good to see the results.

    Try CHKDSK
    using option 3
    Then




    BSOD, 2 different codes [​IMG]
    Diagnostics Test
    BSOD, 2 different codes [​IMG]
    HDD TEST
    *Arrow Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.
    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

    You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

    If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful.
     
    philc43, Aug 10, 2019
    #3
  4. BSOD, 2 different codes

    BSOD during gaming, plethora of different error codes!


    *Arrow Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.
    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

    You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

    If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful. Here you go, the HD tune scans, did memtest but after 1.5hrs only one pass had been finished so will leave it on tonight again for more passes.
     
    shinigami8671, Aug 10, 2019
    #4
Thema:

BSOD, 2 different codes

Loading...
  1. BSOD, 2 different codes - Similar Threads - BSOD different codes

  2. 2 Different BSOD afrer enabling verifier

    in Windows 10 Drivers and Hardware
    2 Different BSOD afrer enabling verifier: I have been having a slight problem with my computer occasionally slowing down and the audio crackling while it happens and so I decided to check my drivers with verifier in the command line. After enabling it I would get a BSOD upon the first reboot but before it gets into...
  3. Random BSODs with different error codes

    in Windows 10 BSOD Crashes and Debugging
    Random BSODs with different error codes: Hi, I'm having random BSODs starting about 1 week ago. First BSOD happened while my sister was using Adobe Illustrator, she suddenly rebooted the PC so there was no MINIDUMP and I didn't make in time to write down crash report information. Second BSOD occurred when I opened a...
  4. Random BSoD's with different stop codes

    in Windows 10 BSOD Crashes and Debugging
    Random BSoD's with different stop codes: Good day, Since Sunday my pc randomly started to bluescreen now and then. This first started while i was playing Satisfactory, when the pc crashed i got the message ''irql_not_less_or_equal''. When i got the BSoD another 2 times but with different messages i started...
  5. Consistent BSOD with different stop codes

    in Windows 10 BSOD Crashes and Debugging
    Consistent BSOD with different stop codes: Starting two nights ago, I have been getting consistent blue screen's at random intervals while using my computer. And the most confusing part is that there's been a variety of different stop codes. And to top it off, some other miscellaneous issues have occurred, such as:...
  6. BSOD different stop codes

    in Windows 10 BSOD Crashes and Debugging
    BSOD different stop codes: Hello, I built my new pc like 6 weeks ago and everything ran smooth until it randomly started to freeze. It froze 2-4 times in the last 1-2 weeks. Now its a constant BSOD with different error codes even at startup. All my research from these codes tells me that it could be...
  7. A couple of BSODs, different error-codes

    in Windows 10 BSOD Crashes and Debugging
    A couple of BSODs, different error-codes: Hi TenForums I updated my 8.1 Pro laptop to 10 Pro a couple of weeks ago, and so far I really like what I see. The only nasty bit about W10 so far has been these BSODs happening every once in a while. After the first few I decided I might need to reset my pc, so I...
  8. Random BSODS With different Bsod codes

    in Windows 10 BSOD Crashes and Debugging
    Random BSODS With different Bsod codes: System specsSony Vaio Sve15136 OS win 10 single language 64 bit Processor Intel core i5 RAM 4gb Graphics AMD Radeon HD 7650M I recently upgraded to win 10 .Now getting random bsods with different codes although drivers seem to work fine. 42979
  9. BSOD, two different messages on 2 bsod's

    in Windows 10 BSOD Crashes and Debugging
    BSOD, two different messages on 2 bsod's: Hello, I recently got two blue screens, one after another. After the first one appeared while I was on my desktop it said the message "IRQL_NOT_LESS_OR_EQUAL", while the second time right after I booted up my system again it said "invalid MDL range". I have Windows 10 Pro...
  10. Many different BSOD codes! [Solved]

    in Windows 10 BSOD Crashes and Debugging
    Many different BSOD codes! [Solved]: I built this pc and Im getting lots of different bsod codes randomly. I get some bsods when using Firefox and when I try to run Unigine Heaven 4.0 too. Sometimes Unigine Heaven runs ok. Mozilla Firefox also crashes constantly in Windows 10, but that is another story. I...