Windows 10: BSOD as usual

Hello,


I have once again gotten a BSOD.

If anyone is kind enough to look at it, I would be pretty happy

If you need, I have included 4 .dmp files from yesterday.


https://drive.google.com/drive/folders/1NOzxu4jMK4ytSGR48-PpzaL0_lxS7S4V?usp=sharing

Thank you

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

4850 BSOD the usual

My 4850 merrily BSODs about once every 2 days it especially enjoys doing it when I'm playing a game, and then after the reboot it sometimes throws in another BSOD for good measure, with a few visual glitches at bootup, if it's in that sort of mood.

It used to be more frequent (I had the pleasure of seeing my game disappear 2x a day) but I lowered my CPU voltage to normal and that seemed to improve things.

Btw the card isn't behaving like a 4850 the rest of the time either Overdrive claims it has a clock speed of 0MHz whereas ATi tool insists that it is 65,000MHz, also DXDiag says that it has 2GB of Graphics memory and DirectX 10 (instead of 10.1), and also claims my computer has 3.3GB of RAM. Not to mention the fact that furmark gives it a repulsively low score.

Any suggestions, apart from reinstalling windows?

 

BSOD Every few days. Usually SYSTEM_SERVICE_EXCEPTION.


Hi Gaklord,

Welcome to the 10forums.

Please remove MSI Afterburner, this software is known for causing BSOD's.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.

Have you tried a clean install after upgrading?