Windows 10: BSOD ATTEMPTED_WRITE_TO_READONLY_MEMORY(netio.sys) and IRQL

Well, good news is that I haven't had a memory corruption or a netio.sys BSOD, but now I've encountered different ones. Here are the dump files from the recent ones.

 

Code: CRITICAL_STRUCTURE_CORRUPTION (109) This bugcheck is generated when the kernel detects that critical kernel code or data have been corrupted. There are generally three causes for a corruption: 1) A driver has inadvertently or deliberately modified critical kernel code or data. See http://www.microsoft.com/whdc/driver...tPatching.mspx 2) A developer attempted to set a normal kernel breakpoint using a kernel debugger that was not attached when the system was booted. Normal breakpoints, "bp", can only be set if the debugger is attached at boot time. Hardware breakpoints, "ba", can be set at any time. 3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data. Arguments: Arg1: a3a01f592ec14700, Reserved Arg2: 0000000000000000, Reserved Arg3: ee3274faf73cc52d, Failure type dependent information Arg4: 0000000000000101, Type of corrupted region, can be 0 : A generic data region 1 : Modification of a function or .pdata 2 : A processor IDT 3 : A processor GDT 4 : Type 1 process list corruption 5 : Type 2 process list corruption 6 : Debug routine modification 7 : Critical MSR modification DUMP_FILE_ATTRIBUTES: 0x8 Kernel Generated Triage Dump PG_MISMATCH: 10 MEMORY_CORRUPTOR: ONE_BIT[/quote] Code: Use !analyze -v to get detailed debugging information. BugCheck A, {fffffab005332672, 2, 0, fffff8016074c812} Probably caused by : memory_corruption ( nt!MiDecrementAndInsertStandbyPages+d2 ) Followup: MachineOwner[/quote] Make sure your SSD Firmware is up to date and see if they have a utility to test it's health. Please run Seatools for DOS on your Mechanical Hard Drive http://www.sevenforums.com/tutorials...s-how-use.html

Are you running the X64 version of Chrome? If so, please uninstall it and install the X86 version.

 

Hello, its been a while but my computer is once again getting blue screens. As suggested, I did update my SSD firmware to the most recent version. I also ran the SeaTools test and I passed the tests. As such, I am no quite sure what to do at this point. Here is my most recent dump files. Thanks once again.

 

Please Run Memtest86+





Information Please download from this site only Memtest86+ - Advanced Memory Diagnostic Tool in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask.

When you have run the test, please let me know the results and then upload the BSOD Posting instructions Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums.

 

This is what I had after I ran the test, I think this is what the results are.
As before the files are there.
Tell me if I need to provide anything else.
Attachment 37858

 

If you are overclocking, please set everything back to default levels. Please uninstall any Gigabyte utilities. Please download and install CPUz [URL="https://www.windowsphoneinfo.com/threads/how-to-upload-and-post-screenshots-and-files-at-ten-forums.8193/']https://www.tenforums.com/tutorials/1...en-forums.html[/url]) of the CPU, Mainboard, Memory and SPD tabs. On the SPD tabs you can select each Dimm Slot from a dropdown in the upper left of the SPD tab. Just provide screenshots of the tabs populated with Memory.

Next please right click on the start icon and select Command prompt administrator, give admin permissions and copy/paste this into the window that opens and press enter sfc /scannow . If you decide to type it in, please notice the space between the sfc and the /. We want it to say no integrity violations were found. If it says there where corrupt files that could not be repaired, please reboot and run it again. You may have to run it 3 times with reboots in between each time.

Please go to your Motherboard's web site and see if you can install the Realtek LAN Driver for Windows 10 V.10.001.0505.2015

Also, Please make sure all Windows Updates are current and installed.

 

Here are the screenshots, and I ran the sfc /scannow​ and no integrity violations were found.
Attachment 37892Attachment 37893Attachment 37894Attachment 37895Attachment 37896

 

Did you run memtest86+ downloaded from this site? Memtest86+ - Advanced Memory Diagnostic Tool

Look at the screenshot of you memtest86 screen then look at the screenshot of your Memory tab of CPUz. Why is there such a major difference? Both memtest and CPUz read the specs directly from the ram modules.

 

I did download from that site. Could you explain what it is that I am looking at?

 

It says you are running DDR2ram with 1-3-3-3 timings

 

What should I do? I'm not very knowledgeable about this kind of things.

 

I'm still getting memory corruption BSOD, as well as tcpip.sys ones. Any word would be appreciated.

 

First, go to your motherboard's web site (GIGABYTE - Motherboard - Socket AM3+ - GA-970A-D3P (rev. 1.0)
), click on Support and downloads, in the OS drop down box put Windows 10 X64, and download the Windows 10 Realtek LAN driver, and Install it. That should solve your lan problems.

Next look at the packaging if you still have it, the receipts or whatever you may have and tell me what ram you bought. I've never seen memtest get ram that far wrong. In your bios, it should tell you your Dram frequency, Dram Voltage and the timings. Tell me what it is set to. On the timings, just the first 4 numbers.

It is not possible to run DDR2 memory in a DDR3 Motherboard.

Also, Next please right click on the start icon and select Command prompt administrator, give admin permissions and copy/paste this into the window that opens and press enter sfc /scannow . If you decide to type it in, please notice the space between the sfc and the /. We want it to say no integrity violations were found. If it says there where corrupt files that could not be repaired, please reboot and run it again. You may have to run it 3 times with reboots in between each time.

Make sure you have the latest firmware for your SSD.

 

My ram is DDR3-1866 ADATA XPG V2 4GB, I've got two of them. Also the /scannow, did not detect any integrity violations. I wasn't sure what was what in my BIOS menu, so I took a couple pictures. Here is one of them. Tell me if I got the right stuff or not. For the timings I had a channel A and B, so I wasn't really all that sure.
Attachment 39280

 

Just checking in again for some help, do you need more than I provided?