Windows 10: BSOD browsing, waking from sleep. CRITICAL_STRUCTURE_CORRUPTION

Code: BugCheck C4, {2000, fffff80adb66b048, 0, 56706353}*** WARNING: Unable to verify timestamp for ScpVBus.sys*** ERROR: Module load completed but symbols could not be loaded for ScpVBus.sysProbably caused by : memory_corruption[/quote] ScpVBus.sys Scarlet.Crush Productions Scp Dual Shock 3 Virtual Bus Driver http://forums.pcsx2.net/Thread-XInpu...6161#pid186161
Code: ScpVBus Scp Virtual Bus Driver Scp Virtual Bus Driver Kernel Manual Stopped OK FALSE FALSE 16,384 12,288 0 05/05/2013 23:31:26 C:\WINDOWS\system32\drivers\ScpVBus.sys 4,096[/quote] Code: BugCheck C4, {2004, ffffbb8b2813ebc8, fffff80cc7ec01e0, ffff8680b853d0a8}Probably caused by : ntkrnlmp.exe ( nt!VerifierBugCheckIfAppropriate+6b )[/quote] Code: ffff8680`b853cff8 fffff80c`c7ec01e0Unable to load image I1KBFLTR.sys, Win32 error 0n2*** ERROR: Module load completed but symbols could not be loaded for I1KBFLTR.sys I1KBFLTR+0x1e0[/quote] Code: I1KBFLTR T1 Gaming Keyboard T1 Gaming Keyboard Kernel Manual Running OK TRUE FALSE 2,560 14,208 0 19/10/2011 06:43:33 C:\WINDOWS\system32\drivers\I1KBFLTR.sys 1,408[/quote]


1) The Realtek driver did not appear in bsod minidump debugging. This may be due to the restore. This driver can be replaced via: Realtek

2) Uninstall ScpVBus.sys using device manager (C:\WINDOWS\system32\drivers\ScpVBus.sys)
Reinstall: reboot and reattach the device

2) Uninstall I1KBFLTR.sys using device manager (C:\WINDOWS\system32\drivers\I1KBFLTR.sys)
This appears to be the gaming keyboard.
Reinstall: reboot and reattach the device

 

I ran driver verifier again after reinstaling the mentioned drivers and i got bsod caused by the same problem as before. It seems that removing the Virtual Bus driver fixes the first bsod. But The second bsod is still caused by I1KBFLTR.SYS and ntoskrnl.exe

 

Code: ScpVBus Scp Virtual Bus Driver Scp Virtual Bus Driver Kernel Manual Stopped OK FALSE FALSE 16,384 12,288 0 05/05/2013 23:31:26 C:\WINDOWS\system32\drivers\ScpVBus.sys 4,096[/quote]

Sometimes corrupted drivers need to be replaced with the identical driver.
Other times a driver will need to be updated to a new driver.
And sometimes with a change in operating system there is no longer a supported driver.
In this case I am not aware of a different driver version. It appears to be an uninstall and reinstall to fix corruption.
There could also be an incompatibility in the computer environment.

1) Download and install Everything
voidtools
It will index everything on internal and external drives
It can be set to start on boot or opened when needed.
Search for ScpVBus.sys

2) Create a restore point

3) right click on ScpVBus.sys and uninstall

4) reboot

5) run windows driver verifier.


If this happens with I1KBFLTR.sys perform the above method.

 

Okay, this is really weird. I removed I1KBFLTR.sys which is my keyboard driver. But as soon as I rebooted the computer and connected the keyboard again I1KBFLTR.sys would install itself again. So i removed I1KBFLTR.sys completley and used another keyboard instead. Then i ran driver verifier and the BSODS seems to be gone. Atleast when booting the computer. It seems really weird that a keyboard would cause a bsod.

I tried finding new drivers for my keyboard but couldn't find any. The company func which is the brand for my keyboard has been bought up by another company so func's website doesn't exist anymore.

 

Sometimes software or a driver becomes corrupt and reinstalling them fixes the problem.
Other times the software or driver is incompatible with the current computer environment.
Were you able to completely uninstall the driver?
That is after uninstall and reboot using everything was it no longer there?
Did you get a bsod when you reattached the keyboard with the same driver?

 

immediately after I plugged in my keyboard again when running driver verifier I got a BSOD. But The crash report says that RTKVHD64.sys was the cause.

Yes, I was able to completley remove I1KBFLTR.sys

 

Reboot into safe mode, detach the keyboard, use everything to find any remaining driver and uninstall I1KBFLTR.sys
Let us know if you were or were not able to completely uninstall in safe mode.
This could be a permission issue if it does not allow complete un-installation in safe mode.


RTKVHD64.sys Realtek High Definition Audio Function Driver http://www.realtek.com.tw/downloads/...Level=3&Conn=2
Also in safe mode uninstall all realtek drivers using device manager and then everything search.
Let us know if you were or were not able to get all of the the Realtek software/drivers.
Again this may be a permission issue.

If you cannot remove the complete realtek driver see whether you get a bsod using driver verifier with wireless off and using cat 5e or ethernet to connect to the internet.

 

I was able to uninstall all realtek drivers and I1KBFLTR.sys from Everything and device mananger. I ran driver verifier after that and everything seemed to be fine. I also installed the newest ethernet drivers from realteks website and tested going to the internet. It seemed to work without problems

When I disabled driver verifier and rebooted I started getting problems. My monitor couldn't recognise my computer on boot up and therefore I got a black screen. But the fans was still running and I could hear sound. I mananged to fix the problem by connecting to my integrated graphics instead of the gpu. But then red artefacts started to apear on the monitor indicating that the integrated graphics might be faulty.

I haven't touched the graphics drivers so I'm not sure waht might be the problem.

 

Open administrative command prompt and type or copy and paste these commands:
1) sfc /scannow
2) dism /online /cleanup-image /restorehealth
3) chkdsk /scan
4) post an updated zip file: BSOD - Posting Instructions - Windows 10 Forums

 

No faults or errors found by running the above commands.

I have not had any BSOD's since the last zip file i uploaded. Only black screens.

 

Code: The driver \Driver\rt640x64 failed to load for the device PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_06\4&7ef09b9&0&00E2.[/quote] Code: rt640x64 Realtek RT640 NT Drive Realtek RT640 NT Drive Kernel Manual Running OK TRUE FALSE 4,096 933,888 0 26/05/2017 09:02:29 C:\WINDOWS\system32\drivers\rt640x64.sys 8,192[/quote] rt640x64.sys Realtek NICDRV 8169 PCIe GBE Family Controller driver
http://www.realtek.com.tw/downloads/...&GetDown=false

Code: Event[21926]: Log Name: System Source: Microsoft-Windows-Kernel-PnP Date: 2017-07-04T21:24:50.463 Event ID: 219 Task: N/A Level: Warning Opcode: Info Keyword: N/A User: S-1-5-18 User Name: NT AUTHORITY\SYSTEM Computer: DESKTOP-VQI609R Description: The driver \Driver\rt640x64 failed to load for the device PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_06\4&7ef09b9&0&00E2.[/quote]
1) Did you make a backup image of your drive with Macrium?

2) Are you able to uninstall Witcher3 and Dragon Age and reinstall them?

3) What does this mean: Inte tillgänglig

4) Uninstall: Realtek NICDRV 8169 PCIe GBE Family Controller driver
Reinstall: Realtek

 

1) Yes I did.
2) I can but it would take awhile. I'm not sure why I would need to do that. I have not experienced any crashes in Witcher 3 and Dragon age only crashes because I have some mods that makes it so.
3) It means: Not available.
4) done. After I uninstalled and reinstalled I didn't receive any Bsod's anymore.

I have not had any BSOD's in driver verifier for a couple of hours. So I'm starting to think my system is getting stable. I also Uninstalled Realtek Audio drivers and reinstalled from their website. I used everything and device manager to uninstall.

The problem I have now is that I get a black screen when using the DVI port on my graphics card. I tried using my HDMI port instead and it worked. I will try with a new DVI cable tomorrow then I will report back. I also get red dots on the monitor when using integrated graphics but it's not a huge deal because I don't use it.

 

Code: 03/07/2017 12:26 Application Error Faulting application name: DAOrigins.exe, version: 1.5.13263.0, time stamp: 0x4eb19d53 Faulting module name: d3d9.dll, version: 10.0.15063.0, time stamp: 0x7f8d5e6e Exception code: 0xc0000005 Fault offset: 0x00052766 Faulting process ID: 0x107c Faulting application start time: 0x01d2f3ef4501bf58 Faulting application path: D:\Games\gog\Dragon Age Origins\bin_ship\DAOrigins.exe Faulting module path: C:\WINDOWS\SYSTEM32\d3d9.dll Report ID: 78a17c9e-da3e-4f88-a7bc-b977d243f67c Faulting package full name: Faulting package-relative application ID:[/quote] DAorigins is a frequently faulting application.
When there are frequently faulting applications > uninstall/reinstall

What's happening with the startup repairs?

 

Ok, I will uninstall Dragon age tomorrow.

When I get blue screen two times in a row Windows automatically wants to do a repair. I suppose that is what you mean. Yesterday it was the only way for me to boot into safe mode and disable driver verifier.
Correct me if I'm thinking of the wrong thing.

 

Whenever you have a bsod please up date the zip.
The black screens need to be troubleshooted.
Can't keep doing startup repairs.
So as many as possible of the faulting applications need to uninstalled and reinstalled or just uninstalled so that we can troubleshoot. So if you can uninstall witcher 3 too and possibly find an alternative game that is not faulting.