Windows 10: BSOD cycle and can’t access safe mode

Discus and support BSOD cycle and can’t access safe mode in Windows 10 BSOD Crashes and Debugging to solve the problem; For the past week, my computer turns on then starts a cycle of blue screens for 5 hours straight then finally shows a boot screen that never fully... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by JoeyDunn1, Mar 26, 2020 at 6:38 PM.

  1. JoeyDunn1 Win User

    BSOD cycle and can’t access safe mode


    For the past week, my computer turns on then starts a cycle of blue screens for 5 hours straight then finally shows a boot screen that never fully boots up my computer. The cycle starts with turning on, followed by my bios main start up screen, then “preparing automatic repair”, then a blue screen, then it restarts. Ive gotten maybe 15 different blue screens such as Phase 1 Initialization Failed, IQRL Not Less or Equal, Page Fault in Nonpage Area, ACPI BIOS Error and many more. I switched my cpu a week before this problem started. I cant access safe mode when I don’t get a boot screen until 5 hours after turning on the computer. What can I do?

    :)
     

  2. Cannot access Safe Mode in BSOD

    Hi,

    Thank you for posting in Community. We understand your concern and we will try our best to help you resove the issue.

    Before we proceed, I would like you to provide the information stated below:

    1. Can you provide the exact error message that is displayed in the BSOD?

    2. Did you make any changes to your computer that led to the BSOD?

    For now, if you wish to access Safe Mode in an non accessible situation, I would suggest that you follow the steps below:

    • Download the Windows 10 ISO and create a Media Creation tool and then perform Startup Repair.
    Refer to the following link:

    Download Windows 10

    (Refer to the section "Installing Windows 10 using the media creation tool
    " in the above article for creating the tool).

    • Once you have the installation media, follow the steps:
    1. Start your computer from the installation media. Insert the disk or USB stick and restart your computer. If you see a message asking you to “Press any key to boot from DVD,”
    do so. If you don’t see the message, you might need to change the boot order in your computer's BIOS settings so that it first starts from the disk or USB. When you see the 'Install Windows' page, tap or click 'Repair your computer' link to start the Windows
    Recovery Environment.

    2. In the Windows Recovery Environment, on the Choose an option screen, click
    'Troubleshoot'.

    3.Click,
    Advanced Options and then click on 'Startup Settings'.

    4.You will have to Restart the computer, once it restarts then you will have the option to log into
    Safe Mode.

    Hope this information helps.
     
    Vanessa Sohtun, Mar 26, 2020 at 6:46 PM
    #2
  3. Password not accepted in Safe mode

    Hi,

    Thank you for posting your query on Microsoft Community forum.

    Have you tried all the above steps suggested by Sangeeta Sarkar on September 13, 2015.

    I would suggest you to provide some information to help you better.

    • Are you trying to login the Microsoft account or the Local account in safe mode?
    • Did you try with only safe mode or safe mode with networking?
    • What is the critical error you are getting?

    If you are using Windows 10. To go to safe mode you have to follow the below steps.

    If you are able to go to login screen in normal mode try the below steps to go to safe mode with networking.


    • At the login screen click on the power symbol.

    • Hold SHIFT + Click Restart.

    • After restarting your system, select the Troubleshoot option.

    • Select advanced options under
      Troubleshoot screen.

    • Click on Startup Settings.

    • Click Restart and follow the onscreen steps to go to
      Safe Mode with networking and check if you are able to login.

    [*]
    Please get back with more information, we will be glad to help you further.
     
    Sachin Venkatesh, Mar 26, 2020 at 6:46 PM
    #3
  4. AmityJane Win User

    BSOD cycle and can’t access safe mode

    BSOD - no access to Windows or safe mode - Bad System Config Info

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]

    BSOD cycle and can’t access safe mode [​IMG]
     
Thema:

BSOD cycle and can’t access safe mode

Loading...
  1. BSOD cycle and can’t access safe mode - Similar Threads - BSOD cycle can’t

  2. computer won’t boot up and i can’t access safe mode

    in Windows 10 BSOD Crashes and Debugging
    computer won’t boot up and i can’t access safe mode: hi, my computer is having an issue where it loads up until the lock screen, i enter my password, and then after saying “welcome” for 20~ minutes much longer thwn the typical few seconds, it shows my wallpaper and stops loading. no apps, no search bar, no internet options....
  3. Stuck in Safe Mode no Internet can’t do anything

    in AntiVirus, Firewalls and System Security
    Stuck in Safe Mode no Internet can’t do anything: Okay, so I tried to reset in safe mode because my drivers werent working correctly, but instead of asking for my pin, it asks for my password. It says that my password is wrong. Additionally restarting doesnt get me out of safe mode, safe mode with networking doesnt give me...
  4. Can’t sign in with safe mode

    in Windows Hello & Lockscreen
    Can’t sign in with safe mode: Ok,so I restarted my computer in safe mode not knowing i need a different password,i done this by the msconfig method. I am not sure if I use microsoft account or local accout for it, I changed my microsoft accout password,and restarted in safe mode with networking,but my...
  5. Can’t get into safe mode

    in Windows Hello & Lockscreen
    Can’t get into safe mode: Hi, I was recently messing around with custom icons and stuff like that when I ran into a problem. I searched for a resolution and was directed to an answer on this telling me to rebuild my cache. I deleted the files and rebooted my computer. After this, I wasn’t able to...
  6. BSOD at boot, can’t enter safe mode

    in Windows 10 Installation and Upgrade
    BSOD at boot, can’t enter safe mode: Last night when attempting to boot my desktop I got a BSOD with the following stop code: Page fault in nonpaged area What failed: Ntfs.sys I have attempted to boot into safe mode. During the boot process I make it to the “preparing automatic repair” loading screen, but...
  7. BSOD at boot, can’t enter safe mode

    in Windows 10 BSOD Crashes and Debugging
    BSOD at boot, can’t enter safe mode: Last night when attempting to boot my desktop I got a BSOD with the following stop code: Page fault in nonpaged area What failed: Ntfs.sys I have attempted to boot into safe mode. During the boot process I make it to the “preparing automatic repair” loading screen, but then...
  8. Can’t get to safe mode

    in Windows 10 BSOD Crashes and Debugging
    Can’t get to safe mode: Hi so my problem began when i decided to update a driver for my laptop. Turned out to be a wrong one because when i restarted i got stucked into a blue screen of death loop and everytime it restarts it goes back to blue screen. I figure that if i go to safe mode and uninstall...
  9. Preventing Access to Safe Mode

    in AntiVirus, Firewalls and System Security
    Preventing Access to Safe Mode: Problem: K9 Web Protection software is disabled when loading in Safe Mode, allowing unfettered access to the internet in Safe Mode. Tried: Installing K9 both normally, and in Safe Mode (appeared that future loading in Safe Mode removed the k9 installation). Manually added...
  10. Stuck in "minimal safe mode" boot cycle

    in Windows 10 Support
    Stuck in "minimal safe mode" boot cycle: Hi, I was just in the process of changing my SATA hard drives over to using AHCI instead of IDE. Following some instructions from the web I issued the command "bcdedit /set{current} safeboot minimal". I rebooted the machine and sure enough it booted into safe mode. It was...