Windows 10: BSOD during gaming, plethora of different error codes!

Hello, I have recently moved from windows 8.1 to 10 after buying a new system (almost), and have been having issues ever since.

Windows is 64-bit Pro.
Problem is that during gaming I get the dreaded BSOD.
**Before I say anything else, I should mention that I did get a brand new board, ram and processor when I bought Win 10, so I am not 100% sure the issue is with the software, but due to a number of things (mentioned below), it seems like it is.

• I have run memtest, HD tune scans etc to check as much as I can the hardware and not a single error has come up
• The error only occurs during gaming (so far and as far as I can remember). Did stress tests and benchmarks and all went absolutely fine but still crash during games.

Now, the issue at hand: system starts fine, no problem booting up or down. When I start a game, I get a bunch of different errors, some of which are:

• Kernel data inpage error
• Faulty hardware corrupted page
• System service corruption
• System exception not handled

And a couple more. I'm guessing if it was the ram or something, the error code would've been the same one.

Sometimes they happen 5mins into the game, sometimes it takes a couple of hours.
Please let me know if you need anyt other info as well, attached is the file that is mentioned in the rules.

Attachment 143765

:)

 

BSOD: System Service Exception (Error code: esif ls.sys)

I'd like to apologize if this problem had been brought up before but since I can't seem to find the answer and I want to make sure.

So, the BSOD has been reoccurring more often lately. It gets to a point where it occurs 3 times a day whether during use or even when it's idle. It says that the cause is System Service Exception and the error code is 'esif ls.sys'. I did try to look the
error code up but I couldn't find anything. There were a lot of solutions to fix BSOD caused by 'system service exception' but it varies depending on the error code. I was wondering what exactly might be the cause and whether it might have the same solution
to some other one with a different error code. Thank you.

 

Blue Screen While Playing Online Games

Hello, I have recently upgraded from Windows 10 Pro 64-Bit Build 10240 to Windows 10 Pro 64-Bit Build 10586.3. A BSOD is always being triggered when I play online games. The BSOD usually occurs during loading and it has an error message of " KMode_Exception_Not_Handled
caused by dump_wmimmc.sys ".

What is the root cause and the possible solution?

By the way the online game that I play is CABAL Online and this is the only game in my PC that triggers BSOD. Other games work normally aside.

 

Hello and welcome to TenForums *Smile

The log files that you provided only show one crash dump file so there is not a lot of information to go on. Furthermore the bugcheck code is not one I have ever seen before!

The stack recorded in the dump includes some references to storage and the analysis suggests memory corruption and so with nothing else to go on I would suggest that you do a check on the hard disk and RAM. This maybe the same as you have already run but it would be good to see the results.

Try CHKDSK
using option 3
Then





Diagnostics Test

HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful.

 

Code: BugCheck 1C7, {0, ffffbf84f2bd8000, 48d42c0c, 9edc0138}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption[/quote] Code: Crash dump initialization failed![/quote]
Open administrative command prompt and type or copy and paste:


1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)


2) sfc /scannow


3) dism /online /cleanup-image /restorehealth


4) chkdsk /scan


When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread

Make sure that there is no over clocking while troubleshooting.


Sometimes there are problems in the bios that produce bsod.


To ensure that there are no improper bios settings please reset the bios.


Sometimes there can be failure to boot after resetting the bios.
So please make sure your files are backed up.
Please make a backup image with Macrium:
Macrium Software | Macrium Reflect Free: Macrium Software | Macrium Reflect Free
And please create a restore point.




How to Clear Your Computers CMOS to Reset BIOS Settings:
How to Clear Your Computers CMOS to Reset BIOS Settings
3 Ways to Reset Your BIOS - wikiHow:
3 Ways to Reset Your BIOS - wikiHow

 

Code: Crash dump initialization failed![/quote]
Open administrative command prompt and type or copy and paste:


1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)


2) sfc /scannow


3) dism /online /cleanup-image /restorehealth


4) chkdsk /scan


When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread

Make sure that there is no over clocking while troubleshooting.


Sometimes there are problems in the bios that produce bsod.


To ensure that there are no improper bios settings please reset the bios.


Sometimes there can be failure to boot after resetting the bios.
So please make sure your files are backed up.
Please make a backup image with Macrium:
Macrium Software | Macrium Reflect Free: Macrium Software | Macrium Reflect Free
And please create a restore point.




How to Clear Your Computers CMOS to Reset BIOS Settings:
How to Clear Your Computers CMOS to Reset BIOS Settings
3 Ways to Reset Your BIOS - wikiHow:
3 Ways to Reset Your BIOS - wikiHow[/quote] Here you go:

Windows version: 1703 (OS build 15063.483)


Rest of the stuff:

Microsoft Windows [Version 10.0.15063](c) 2017 Microsoft Corporation. All rights reserved.C:\WINDOWS\system32>winverC:\WINDOWS\system32>sfc /scannowBeginning system scan. This process will take some time.Beginning verification phase of system scan.Verification 100% complete.Windows Resource Protection did not find any integrity violations.C:\WINDOWS\system32>dism /online /cleanup-image /restorehealthDeployment Image Servicing and Management toolVersion: 10.0.15063.0Image Version: 10.0.15063.0[==========================100.0%==========================] The restore operation completed successfully.The operation completed successfully.C:\WINDOWS\system32>chkdsk /scanThe type of the file system is NTFS.Stage 1: Examining basic file system structure ... 289536 file records processed.File verification completed. 25956 large file records processed. 0 bad file records processed.Stage 2: Examining file name linkage ... 348984 index entries processed.Index verification completed. 0 unindexed files scanned. 0 unindexed files recovered to lost and found.Stage 3: Examining security descriptors ...Security descriptor verification completed. 29725 data files processed.CHKDSK is verifying Usn Journal... 35049760 USN bytes processed.Usn Journal verification completed.Windows has scanned the file system and found no problems.No further action is required. 233916415 KB total disk space. 82828960 KB in 138261 files. 108608 KB in 29726 indexes. 0 KB in bad sectors. 406231 KB in use by the system. 65536 KB occupied by the log file. 150572616 KB available on disk. 4096 bytes in each allocation unit. 58479103 total allocation units on disk. 37643154 allocation units available on disk.C:\WINDOWS\system32>

 

*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Similarly with a memory test it would be good to post the results after you have run memtest86+ for a minimum of 8 passes

You indicated that many more crashes have occurred, however, they are not being recorded. Please make sure that your system is setup to record crash dump files: Configure Windows 10 to Create Minidump on BSOD

If the BSOD errors are all different it does tend to suggest a hardware problem. Sorry I can't be more helpful. Here you go, the HD tune scans, did memtest but after 1.5hrs only one pass had been finished so will leave it on tonight again for more passes.

 

There is 16 GB RAM with the same parameters. It is not yet known whether it is dual channel. If possible the best testing will be testing both RAM simultaneously. If there are any errors then the RAM will be tested independently to differentiate the RAM and the DIMM. So if you can bear the wait, having 8 or more passes will enable us to rule in or rule out the RAM as a source of the bsod.

 

It wont be easy but i'll try to leave it on for about 12hours or so, I usually work at weekends so cant just go afk for long periods of time.
But is this normal? only crashing during/after gaming? Stress tests and everything works fine. Its just really weird.