Windows 10: BSOD Error: VIDEO_DXGKRNL_FATAL_ERROR & DRIVER_POWER_STATE_FAILURE after updating to...

Hi Dear,


I'm using "ASUS Vivobook 15 X542UN" Notebook. Previous Day i download windows 10 1809 from Microsoft website and clean


install it.


After That i download intel driver from intel official website according to my Notebook Processor :-"https://ark.intel.com/products/124967/Intel-Core-i5-8250U-Processor-6M-Cache-up-to-3-40-GHz-". After That i download NVIDIA Graphic Driver from NVIDIA Official Website according to my Notebook GPU :- "https://www.geforce.com/drivers/results/140567".


After That i Install intel graphic driver and reboot my system then i install "IOBIT Driver Booster 6" for Update all my driver at a


latest one.i updated all of my driver without NVIDIA Graphic driver. after install all the driver and reboot my system, Now i


install NVIDIA Graphic Driver then GOT BSOD(Blue Screen Of Death) problem. Stop Code:- "VIDEO_DXGKRNL_FATAL_ERROR"


after that my system took automatic reboot and then again GOT BSOD. Another Stop Code:- "DRIVER_POWER_STATE_FAILURE"



after reboot another BSOD shows. Stop code:- 9f (something like that i can't remember).


I search in Microsoft community for support for solution this problem.there are many solution that i saw and part by part did


all of those method.but nothing happen.i was so nervous that this is my new laptop and everything is new why this happen.


after that i did hardware damage check. Hard Disk Test (passed), RAM Test( Passed), System Self Test(passed). Then i


download BIOS from manufacturer website and successfully update and reset my BIOS.watching and confirming there is no


hardware damage and then update and reset my BIOS again i format my full hard disk and did all kind of thing which i


describe before.but again same problem happen again and again.



After Finding No other way to use windows 10 1809.i decided to roll back windows 10 1803 and see what happen next.again


i update and reset my BIOS and then formatted full hard disk then i install windows 10 1803 which i have downloaded from


microsoft official website.and then i install latest version of driver which i describe before how i did i do that.and done every


windows geek like remove cortana,Microsoft edge, clean disk space, set the settings which i wish. i'm amazed .....................


i'm just amazed that there is no SINGLE PIECES OF PROBLEM.there is no BSOD problem anymore. Now i'm using my laptop


without having any kind of issue.Smooth,fine,fantastic. Some other guy say that i is my hardware problem.my question is


"is it my hardware problem so, why this is not occurs when i'm using windows 10 1803 ??". Now i'm using windows 10 1803


without having any kind of issue.playing all kind of game,Doing University project, and many more.i wish i could use windows


10 1809 and latter windows version and stay updated all time.but i can't understand where is the main problem.in my


machine???? in my hardware???? or somewhere......please give me a proper solution.




***Original title: Clean Install Windows 10 1809 October Update and Got BSOD(Blue Screen of death)***

:)

 

BSOD when running on battery - driver_power_state_failure

***Merged***

Hello,

Since a few months my laptop - MSI GS60 2PE running Windows 10 Home - started giving BSOD's with the DRIVER_POWER_STATE_FAILURE after a seemingly random time when running on the battery. As I'm using it every day for work,
I depend on the machine and managed by just plugging it in.

While that works, I know it should be possible to make it work on the battery...

I've recently "reset this pc" using the build in option in Windows 10, after which I installed all "latest" drivers from the MSI site. I also re-installed all programs required to do my job and play some games.

Yesterday, Windows wanted to install the Fall Creators Update: I did. Booting the laptop while unplugged now gave me another BSOD, though with a different message: VIDEO_DXGKRNL_FATAL_ERROR. This seems to point to the Intel HD 4600 or Nvidia
GTX 870M.

To sum up some other issues I was starting out with...

Syptoms

• When unplugged, a BSOD occurs after a seemingly random time. (driver_power_state_failure)
  • After updating to the fall creators version, it also throws video_dxgkrnl_fatal_error; feels like a coin flip which one it will show.
    
• Bluetooth was failing after a couple of minutes, regardless whether I used it or not and whether the laptop was plugged in or not.
  
• Shutting down Windows would sometimes just heat up the CPU, make the fan go haywire and do nothing but turning the screen off.

I've tried / did:

• All drivers are up to date. This was verified by using DriverView and manually going over all of the non-Microsoft drivers.
  • This step fixed symptom 2 described above. Next to the latest version there was some patch (or 3 major versions ago) that couldn't be removed by conventional means. The build in troubleshooter actually removed it and bluetooth is now working
    as it should.
  • The HD4600 drivers were removed from the device management and I installed the latest according to the Intel site.
  • DDU was used in safe mode to remove the Nvidia driver and the latest one was installed.
• BlueScreenViewer shows the minidumps and lots of drivers.
  
  • The one created when the driver_power_state_failure occurred is useless, as nothing is marked but the ntoskrnl.
  • The one created when the video_dxgkrnl_fatal_error occurred shows ntoskrnl, watchdog and dxgkrnl.
    
• A clean boot (disabling all non-Microsoft services and disabling all startup programs) still results in the BSOD.
  
• Booting the laptop while plugged in, letting it run for a couple of minutes so everything is started and then unplugging it also seems to work.
  • Yesterday, I unplugged it and could work with it for about 2.5 hours before it called out for power: I doubt the battery is the issue.
  • I was asked to run a battery check (powercfg -energy -output ...) but that doesn't seem to show any issues. (design capacity '55031' Last full
    charge '38556'. The laptop is over three years old.)
    
• Starting in safe mode with networking will not result in a BSOD. (At least not within the hour I left it on.)
  
• Unchecking 'turn on fast startup' - as suggested in so many posts - in the power settings only causes issues.
  • When unchecked, windows won't shut down properly.
  • When checked, it does shut down normally. This seems to be the
    fix for symptom 3.
    
• Running various Windows troubleshooters didn't do much. Only the 'Windows Update' said it had some fixes regarding the database and 'fixed' it.
  
• The bios is up to date. (Version E16H2IMS.112)

Any help would be welcome.

Cheers!

PS: yes this post looks a lot like my
previous post, but that was marked answered because a moderator thinks all checks suggested can be performed within three days, next to a daily routine.

 

Unable to update, BSOD DRIVER_POWER_STATE_FAILURE

Hi,

Thank you for being a part of Windows 10 Technical Preview testing.

To fix the issue with BSOD error on your computer
DRIVER_POWER_STATE_FAILURE is caused by some drivers.




Method 1: I would first suggest you to remove all external devices connected to the computer except essential devices like keyboard and mouse and then boot the computer. Now, try to install and check.

Method 2: I would suggest you to update the drivers for the display card from the manufacturers website.

Update a driver for hardware that isn't working properly

http://windows.microsoft.com/en-us/...iver-hardware-isnt-working-properly=windows-7

Method 3: If the issue still persists, I would suggest you to boot the computer in a clean boot state and then try to install and check. Booting the computer in a clean boot state can reduce software
conflicts and help identify the root cause of the issue. You can refer to this article for more information:
http://support.microsoft.com/kb/929135

Note: After troubleshooting, reset the computer to start as usual. Refer to the step
How to set the computer to start as usual after clean boot troubleshooting under more information.

Post us the results after you try the above steps.

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.