Windows 10: BSOD everytime

If you have no problem, no zip is needed *Wink

 

Ok so PC seems to be working fine now as long as that fast boot is disabled...lol but at the same time I really want that option enabled and want to know why is conflicting with my PC and giving those BSODs

 

I'm no expert, I wouldn't be able to debug the crashes to explain what is happening that is giving you the problem.

 

Well I'm not having the issue anymore as long as I keep fast startup disabled so that pretty much fixes it *Biggrin

But seriously thank you very much for your help and taking your time on this; I really appreciate.

Cheers

 

*Thumbs

Glad to hear that.

 

lol just as i read your post i opened up teamspeak to talk to friends and wham my mouse wasnt working....but the lights were on and then the computer restarts lol. would you be able to check one last dump file?

 

What are the memory frequency and voltage values in the BIOS?

 

So I never changed anything for overclock settings but I'll quickly just tell what each is set to.

Cpu ratio: auto
Adjusted cpu frequency 3500Mhz

Ring ratio: auto
Adjusted ring frequency 390Mhz

Cpu base clock MHZ: 100.00

DRAM FREQUENCY 2133Mhz

Cpu voltage: 1.104v

Cpu Sa voltage 1.112v

Cpu IO voltage 0.952v

Dram voltage 1.200v

(There are others as well but they don't have any numbers next to them and everything is set to auto)

 

Also found these extra voltages on another screen


Voltage

System/5v : 5.040

System/12v : 12.288

 

Only the DRAM values were needed *Smile
The others would be useful to, later if this proceeds






Diagnostics Test

HDD TEST


Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums



Note Do not run SeaTools on an SSD as the results will be invalid.



Run chkdsk
Disk Check - Windows 7 Help Forums



Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
Let me know what the results are

• of the error scan,
• make a screenshot of the health of every hard drive and post the screenshots,
• post screenshots with the benchmark of the
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

 

i ran seatools and did the scan for long generic test and the harddrive passed that.

i did diskcheck for both ssd and hdd no errors there.

Also did the chkdsk command in cmd for both and had to restart for ssd, it said no errors there as well and test was successful.

OK so for HD tune here are the results.

(i only did hd tune on my ssd since thats what i use for windows and everything. It does all the booting and stuff)

 

It is recommended to run HDtune on every hard drive

 

ok here are the results for the other harddrive.

 

The error scan is still busy.

 

here is the rest of it. Sorry about that, i didnt get a full scan right there since it gave me the option to start again and not the option to stop the scan so i just took a screenshot there but now that i realised it. i did the scan for the last bit separately, from 800gb to 1000gb.

if you like i can do the full scan again as well.