Windows 10: bsod, hanging, power cycling

Hey!



So, today has been a rollercoaster of issues everything was fine yday



Started off with a nice warming BSOD - irql not less or equal into sys service exception win32kbase.sys right after system rebooted itself.

Then everything was fun for a while, until PC froze completely, restarted into another sys service exception. Did some standard scans chkdsk etc and hoped it was all fixed, until I got a video_scheduler_internal_error bsod and pc started powercycling.



Any suggestions or ideas? Currently reseating components.



E: managed to get in after reseating and this is the only minidump file https://www.dropbox.com/s/e18z25d5pyldxi9/110320-6218-01.rar?dl=0

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

BAD_POOL_HEADER BSOD, Dump File attached


Hi Groggubus,

Welcome to the 10forums

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Please follow this suggestion for the BSOD

1. Please open BitDefender and go to the modules,
2. Go to the firewall settings,
3. Uncheck 'Block port scans in the network',
4. Reboot your system <-- IMPORTANT

 

I THINK MY PC RESET IS FROZEN?

Hello,

To help you resolve your concern, we suggest that you follow the instructions below:

Power cycle your device. Here are the steps:

• Force shutdown your computer by pressing and holding the power button down for 5 to 10 seconds.
• Remove all the attached cables for 2 minutes then put them back on.

If the same thing happens, we suggest that you perform the reset again.

Let us know how it goes.