Windows 10: BSOD in Desktop

I forgot i had a beta version of bios, it's 1206 like you know, but last 3 bios are all beta, 1205, 1203, i don't now why ASUS ?...
Do you think it's better to try the last non beta version 1103 ?

when you say try another GPU, it is to try another graphics card, right ? I don't think i have another, to run windows 10, but i will see.
I think your feeling it's right, like a said in my post before, sometimes, windows start in low resolution, and give some error like this "graphic card not installed etc etc"

Anything else i should try or do ?


Thank you axe0!

 

I always do *Smile

Yes, GPU stands for Graphical Processing Unit a.k.a. the graphics card.
You could also remove the GPU to see if that helps, I didn't check your CPU but many have built-in GPUs.

 

ok, i will downgrade my bios version, and give a try.
My CPU, it's old, do not have a GPU, it's q Q6600.


If i have more BSOF , i can post here , the zip file, or it's all the same ?

Thank you axe0.

 

If any BSOD occurs upload a new zip in a new post *Smile

 

No dumps newer than Tue Jun 28 17:25:01 in the zip file. That one shows
Code: BugCheck 50, {ffffcfffd8a8e950, 2, fffff80019aa31de, 2} Could not read faulting driver name Probably caused by : memory_corruption[/quote] Would be a good idea to test your ram if you have not already done so:

RAM:

Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums



Information




MemTest86+ is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

• RAM will accept and keep random patterns of data sent to it
• There are no errors when different parts of memory try to interact
• There are no conflicts between memory addresses

Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.



Warning
MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.

If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.



Note
MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.

Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.

 

Hello @rstudio *Smile

I was busy over the last 2 days and am just catching up with the thread again. Have you had any success with other graphics card drivers or with another graphics card? What was the result of the memory test?

 

Hi philc !

I can not try another graphic card yet, i have to get time to change with another graphic card, (because i don't have the other pc here) very old, but i know it can run windows 10.

I have run memory test today, it has done 5 passes, with no error´s, but because i need to use the pc, i have to cancel it, i will run it , these night and all nex day to do 8 passes.


Thank you all!

 

The user manual may explain it to you *Smile
P5K3 Deluxe/WiFi-AP | Motherboards | ASUS Global

 

Thank you Axe0, i have delete the question, before i read your post , sorry, because i realize how, with EZ flash, in the bios *Smile.

I have downgrade to version 1103 right now. Let's see what append.
Yesterday , and today i have no BSOD, but do not mean anything, it is normal in my pc.

Thank you

 

Ok, after 9 passes with memtest, i have no error's , so ram memory are ok.
I will wait for the next BSOD to post.

 

Ok have another BSOD.
What you people think?
Chek this zip file, i realize the last dump file, have the date of 26/06/2016.
Today is 06/07/2016.
If i have a BSOD in last minute, should not i have a dump file with date 06/07/2016.

I'm i analyze bad ?

 

More information about the situation would be nice, I cannot read the text files because they're in a foreign language I can't read + there are no logs about any new BSOD.

 

yes i have talk about that, there is no log , why ?
what text file are you talk about ? if i can help...

 

All files except the dumps, it would be too much for you to translate them as there are thousands of logs.
I do not know why because I cannot read the logs.

Try to change the language to english and upload a new zip please.
Language - Add, Remove, and Change in Windows 10 - Windows 10 Forums

 

ok, there it is, in english

thank you *Party