Windows 10: BSOD in Desktop

This is possibly the reason for the dump problem, there are paging errors on different hard drives.
Please run below tests on all hard drives or partitions.





Diagnostics Test

HDD TEST
*Arrow Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums



Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the error scan,
• the health,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

 

I think last week i change the write debugging information,
I have it in kernel dump. i Will change it to automatic memory dump , that i think its the default mode, lets see if in next BSOD create a dump file.

I am talk about " system\advanced system setting\startup and recovery

I have finish the seatools and chksdk with no error, i will post the fotos soon.
I am running the HD tune now .

 

Please post the pics in a new reply *Smile

 

Ok, there it is, i have a temperature warning in WD5000AAKS of 55C, and a firmware update in seatools, that i did not update.

 

Am I guessing it right that you've performed chkdsk in Windows Explorer?

If so, please enter following commands
Code: chkdsk C: /r[/quote] The partition needs to be unmounted, please enter Y to schedule it on reboot and reboot your system.
It could take several hours for the command to finish, please just let it run even when it may look like it is stuck or frozen.

Please run this command for all partitions and upload the logs *Smile

A thing to add, please keep an eye on the spin retry count attribute on the ST3500320AS. Increasement of the amount of spin retries indicates that the hard drive mechanism fails what means that the hard drive would need to be replaced or removed.

 

Yes you are right, i have done it in HDD properties like step one in this tutorial.
Disk Check - Windows 7 Help Forums

CHKDSH its Only to run on disk C ? disk C its a SSD, i will run it and post here.

Thank you axe0

 

Quote:

 

I know, but because your code it-s only to disk C: , i thought the other-s HDD have a good log.
Ok ,there it is the disk C:.
I will do it on other-s

 

That was only as example, I didn't find it worthy to write it down for every partition you have *Wink

Thank you for the chkdsk log, Windows has changed a few things.
You may want to run chkdsk a few times on each partition, it'll help with the file system health *Smile
Code: Checking file system on C: The type of the file system is NTFS. A disk check has been scheduled. Windows will now check the disk. Stage 1: Examining basic file system structure ... 272896 file records processed. File verification completed. 11685 large file records processed. 0 bad file records processed. Stage 2: Examining file name linkage ... 352066 index entries processed. Index verification completed. 0 unindexed files scanned. 0 unindexed files recovered to lost and found. Stage 3: Examining security descriptors ... Cleaning up 847 unused index entries from index $SII of file 0x9. Cleaning up 847 unused index entries from index $SDH of file 0x9. Cleaning up 847 unused security descriptors. CHKDSK is compacting the security descriptor stream Security descriptor verification completed. 39586 data files processed. CHKDSK is verifying Usn Journal... 40494056 USN bytes processed. Usn Journal verification completed. Stage 4: Looking for bad clusters in user file data ... 272880 files processed. File data verification completed. Stage 5: Looking for bad, free clusters ... 20225629 free clusters processed. Free space verification is complete. Correcting errors in the master file table's (MFT) BITMAP attribute. Correcting errors in the Volume Bitmap. Windows has made corrections to the file system. No further action is required. 116655100 KB total disk space. 35240028 KB in 186054 files. 127528 KB in 39589 indexes. 0 KB in bad sectors. 385028 KB in use by the system. 65536 KB occupied by the log file. 80902516 KB available on disk. 4096 bytes in each allocation unit. 29163775 total allocation units on disk. 20225629 allocation units available on disk. Internal Info: 00 2a 04 00 21 71 03 00 c0 a0 06 00 00 00 00 00 .*..!q.......... 99 01 00 00 6d 65 00 00 00 00 00 00 00 00 00 00 ....me.......... Windows has finished checking your disk. Please wait while your computer restarts.[/quote]

 

Ok , i see, thank you.
One thing , you talk about keep an eye on the spin retry count attribute on the ST3500320AS, how can i do that, run HDD tune on occasion, or how ? And how to see if it-s bad, or need to replace the HDD ?

thank you

 

Once in a short while open HDTune and check if either of the values of the SRC changes.
Remember to make a screenshot of it or note the values down.
If you're wondering what those parameters such as threshold and data mean
HD Tune Help

A FYI for why I tell you to keep an eye on it, from the HDTune FAQ

 

Understood, thank you axe0.
There it is, the log off all HDD.

 

A write failure does not sound very good *Sad
Please try the command again on the G partition.
Code: CHKDSK discovered free space marked as allocated in the volume bitmap. Write failure with status 0xc0000015 at offset 0x7471060200 for 0x200 bytes.[/quote]

 

Have another write failure, i think.

 

Please try the same command, only this time use /b parameter instead.

/b parameter includes /r parameter + clears the list of bad clusters on the volume and rescans all allocated and free clusters for errors.