Windows 10: BSOD irql_not_less_or_equal issues

System specsMBD: Asus Prime B450m-A IICPU: Ryzen 5 3600GPU: ASUS Dual AMD Radeon RX 6600 8GB GDDR6RAM: 2x8GB Corsair Vengance LPX CL16 3200MT/s DDR4 DOCP ON also have 2 x16GB corsair vengance LPX CL16 2666MT/s DDR4 that i have used1st drive: Crucial P3 Plus 1TB M.2 PCIe Gen4 NVMe SSD2nd drive: Seagate Barracuda ST1000DM0033rd drive: Seagate Barracuda ST1000DM010PSU: Thermaltake TR2 600W PSW i wanted to change this but it tests okOS: Windows 11 24h2IssueThis rig was working fine when first built as a free upgrade had new unused motherboard, cpu and ram, given to meRAM was running at full

:)

 

BSOD problems IRQL_NOT_LESS_OR_EQUAL + MEMORY_MANAGEMENT + PAGE_FAULT_IN_NONPAGED_AREA

Some days when I turn off my PC it happens sequentially these 3 BSOD (IRQL_NOT_LESS_OR_EQUAL + MEMORY_MANAGEMENT + PAGE_FAULT_IN_NONPAGED_AREA). Not necessarily in this order. But the errors are basically one of these.

• I've already done memtest86 and got no errors
  
• SFC /scannow with no errors too
  
• checkdisk with no errors
  

I've checked the error with BlueScreenView and the problem is with the driver ntoskrnl.exe.

Any suggestion of whats going on?

 

Bsod "irql_not_less_or_equal"

This most probably is due to a faulty charger or a battery.

Generate Battery Usage Report in Windows 10

But there are other common causes of it:

• Incompatible Drivers
• Malfunctioning hardware
• Registry Issues
• Malware attacks
• Incomplete driver installation

To solve the problem, you could try using the following common methods:
Method 1: Use SFC and DISM
Step 1: Press Windows + X and then select Command Prompt (Admin) from the menu.
Step 2: Type in the following command and then press Enter.
sfc/scannow
Step 3: Wait for the process to finish and it will show you results. If Windows can repair your files, it should say that the corrupted files are repaired. If the process is stuck, the Windows could well fail to recover itself. You will have to use the DISM tool to repair your Windows sinceit’s a more efficient and powerful tool than SFC, use these steps:
Step 4ress Windows Key + X and then click on Command Prompt (Admin).
Step 5: Now type the following command and then press Enter.
DISM /Online /Cleanup-Image /RestoreHealth

Method 2: Update Your Graphics Drivers
Step 1: Press Windows Key + R to open the Run box.
Step 2: Type in devmgmt.msc and press Enter to open the Device Manager
Step 3: Expand the Display Adapters category.
Step 4: Right-click on your graphics device, and then select Update Driver.
Step 5: Select the Search automatically for updated driver software option.
Step 6: The computer will search for drivers online and install them.

Method 3: Check Your Memory and Hardware
If the IRQL_NOT_LESS_OR_EQUAL error is not related to the software, then some hardware glitches might be causing the issue. In such a scenario, you should try testing the RAM of your device. Fortunately, Windows offers a utility tool called memory diagnostics. Refer to the following instructions to learn how to access the utility tool.

Step 1: Press Win + Q to open the search box, enter Memory Diagnostic to open the Windows Diagnostic utility.
Step 2: Select the Restart now and check for problems option to scan the RAM.

Reference: [Solved]: IRQL_NOT_LESS_OR_EQUAL Error in Windows - Bitwarsoft

 

IRQL_NOT_LESS_OR_EQUAL - BSOD

Dump File

I recently built a few new PCs and I am now getting a BSOD multiple times per day on one of them related to the IRQL_NOT_LESS_OR_EQUAL error. It references a driver named rtf64x64.sys. From what I can find it seems like it is related to a network driver issue, but is not the driver being used by and of the network adapters. Can I just delete this file or would this cause further issues? Doesn’t seem to matter if the PC is at idle or under load when it happens

The following are all steps I’ve taken so far:

• Doing a fresh install of Windows 11 (twice)
  
• Grabbing the latest drivers from Gigabytes website and updating
  
• Updating Gigabyte BIOS to latest version
  
• Installing all available Windows updates
  
• Running Windows Memory Diagnostic (No issues)
  
• Ran SFC and DISM
  
• Used HWInfo to determine that the CPU is well writhing safe temp range (around 70C at full load)
  

System Specs:

• Ryzen 9 7950X3D
  
• Asus 4070 Super
  
• Corsair Vengeance DDR5 5200mhz
  
• Gigabyte B650 Gaming X AX
  
• 750W PSU
  

Please help, thank you.