Windows 10: BSOD Memory Management with Ryzen 5 3600

I have a few problems with the new hardware, my specs are:

• Ryzen 5 3600 (new)
• Asrock B450M Steel Legends (new)
• RAM Gskills Ripjaws V 2x4G 2133 (2 years)
• PSU Seasonic 520W (2 years)
• VGA Asus Dual RX580 8G (2 months)
• SSD 120GB Plextor MSG (2 years)
• HDD WD Blue 1TB (2 years)

Since I first boot my pc with the new hardware (main and chip), I constantly encounter the "MEMORY_MANAGEMENT" bsod, and a few more but mostly memory_management.

• REGISTRY_ERROR
• IRQL_NOT_LESS_OR_EQUAL
• ATTEMPTED_WRITE_ON_READONLY_MEMORY
• SYSTEM_SERVICE_EXCEPTION (win32kfull.sys)
• IRQL_GT_ZERO_AT_SYSTEM_SERVICE
• SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (dxgmm2s)
• KERNEL_SECURITY_CHECK_FAILURE
• PAGE_FAULT_IN_NONPAGE_AREA

It happened somewhat randomly. I tried taking it back to the dealer to figure out the problems but nothing has been fixed so far. I also tried:

• Reinstall Windows 10 Pro.
• Run Memory Diagnostics Tool
• Update BIOS, mainboard and VGA driver to the latest.
• Reinstall the RAM between the 4 slots, clean the RAMs' connectors.
• Use dism and sfc to check for corrupted files (The corrupted files were found and successfully repaired, but the problem persists).
• Run memtest86 on 2 RAM sticks seperately.
• Analyze minidump files: https://drive.google.com/open?id=1rlTe9WAtQ5lsaIaIvLCxQ00DsGxMXqX9

This is my first build so I'm not sure what I should do now. Can you guys give my some advises about what I should do? Thank you very much for your time. ^_^

:)

 

Memory Management Error

Yesterday i upgraded to a new 750w psu. I then saw that windows and all other applications were only recognizing 3 of my Ryzen 5 1600's 6 cores. I updated Window and my bios and that problem was solved. But now my computer is unusable because of constant
BSODs. Most of them are memory management errors or Attempted to write readonly memory. Ive tried Reinstalling windows but the memory management error happend right in the middle.

Any help is appreciated.

 

BSOD- memory management

Upon checking the dump file, the issue is being caused by ntoskrnl.exe. Ntoskrnl.exe is the one responsible for memory management that is why you're having the Memory Management error. We suggest that you follow the steps found in the link that we provided
in our last reply to resolve the issue. Please take note that if you're overclocking your processor or video card, kindly reset their settings to default.

Let us know the outcome after performing the provided steps.

 

IRQ memory BSODS, device manager, memory range?

The only time I've seen that type of BSOD for myself is when I fried the PCI-e slots on my Striker 2 board... There wasn't anything that I could do, try and rma and go on.. I would suggest the steps that MilkyWay has said.. But, if you really don't know much about Bios's... I wouldn't play with Irq's... That can mess up everything on your board. USB, ethernet, ram, chip... But, that's just me on playing with irq's... To much of a hassle IMHO..