Windows 10: BSOD on Restart, Boots fine from cold power up

If I am in Windows 10 and choose "Restart" or the OS reboots from a software install/update, I get a BSOD after post.

The screen reads:
Recovery
Your PC/Device needs to be repaired
The operating system couldn't be loaded because the kernel is missing or contains errors.
File: /windows/system32/ntoskrnl.exe
Error code: 0xc0000221

If I power the system down or do a shut down, from a cold power off, it boots fine every time. Only a warm restart causes this error.

:)

 

BSOD DRIVER_POWER_STATE_FAILURE randomly after cold boot/sleep


For the past month I have been getting random BSOD's all with driver power state failure. They happen randomly, usually within the first 5-10 minutes of cold booting or waking my computer. Steps I have taken to attempt to fix the problem:

1. Reinstalled GPU drivers/ tried old drivers
2. Fresh installed Windows 1803, still happened, then fresh installed 1709
3. Disabled Fast Boot

None of these things fixed the issue, any help would be much appreciated at pinpointing the issue. Thanks

 

Memory Related BSOD Every Cold Boot

First let me list my specs:

Motherboard: Gigabyte Z370 Aorus Ultra Gaming

CPU: i7 8700k @ stock

RAM: 16GB Corsair Vengeance LPX DDR4 @ 2133 MHz

GPU: Gigabyte Aorus GTX 1080 TI

Storage: Samsung 840 EVO SSD (Windows Installed) 240GB

Seagate FireCuda 2TB HDD

Seagate Barracuda 2TB HDD

I cannot find anyone to help me with this problem, so when the i7 8700k came out I bought a new motherboard, RAM and the CPU. But ever since i installed the parts I am now plagued with Memory Management and Kernel Security Check BSODs on cold boots only,
it will keep giving me these errors seconds after the PC boots for almost a dozen times and then itll be fine until the next cold boot, if I restart the PC it wont give me the BSOD.

Ive reinstalled Windows 2 times but nothing, and I have tested the RAM multiple times with no errors and the PC is fine in Safe Mode.

I think it may be driver related but I dont know where to look.

 

BSOD with internal power error at cold boot or waking up from hibernation

Thank you Vijay for your suggestions.

I tried verifier. Upon rebooting it was normal just like before. When cold booted the BSOD happen again. Like before, it was right after the windows logo showed, before the log in screen, and I think verifier did not have a chance to launch. The BSOD screen
was the same as before, not showing any possible driver violation. Here is the new dump file after verifier enabled:

https://drive.google.com/open?id=1NVP91WzM_Kj0nswszD4Y38YzuQLnMbXD

Thanks again!