Windows 10: BSOD on startup only

New laptop that was running fine last week then I formatted it via USB. After format I can shut down and startup fine but after I do Windows update it seems to BSOD every time I turn it on. I noticed it after I turned fast boot off. Tried reformating a couple times with same results

Acer aspire 5

• 10th Generation Intel Core i5-10210U Processor (Up to 4.2GHz)
• 15.6" Full HD (1920 x 1080) Widescreen LED-backlit Display
• Intel UHD Graphics 620
• 12GB DDR4 Memory and 512GB PCIe NVMe SSD
• Intel Wireless Wi-Fi 6 AX201 802.11ax Dual-Band 2.4GHz and 5GHz featuring 2x2 MU-MIMO technology (Max Speed up to 2.4Gbps)
• Acer Fingerprint Reader supporting Windows Hello

DMP files https://drive.google.com/open?id=1pIddZxWMgtiHVtZn1i24rJE_ILXJbrwB

submitted by /u/blueberrybub
[link] [comments]

:)

 

Can't get GPU-Z to start with Windows 8.1 startup

I'm not sure how to do that. Could you list the steps for a noob?

 

Nvlddmkm.sys BSOD on startup?

The problem is the laptop (specs in signature) not rig in system specs.

Sometimes when I switch it on, Vista loads normally.
Other times, just after the horizontal 'loading' bars and before the Vista orb appears, I get a BSOD of Nvlddmkm.sys or Nvlddmkm.dll then the laptop reboots, BSOD's, reboots... it can happen like 5 times!

I've been googling all morning but apparently there's no solution to this?

It does the BSOD only during startup. Once Vista loads, it never BSODs not even during a game.

 

BAD_POOL_HEADER BSOD, Dump File attached


Hi Groggubus,

Welcome to the 10forums

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

Please follow this suggestion for the BSOD

1. Please open BitDefender and go to the modules,
2. Go to the firewall settings,
3. Uncheck 'Block port scans in the network',
4. Reboot your system <-- IMPORTANT