Windows 10: BSOD once a week with bug check code, 0x00000124

There we go, finally some drivers *Smile
Please update Paragon or remove it while troubleshooting.
Please check Broadcom for network driver updates: Driver Reference Table - k57nd60a.sys
Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the drivers using custom/advanced options.

Code: ffffd000`461b6b78 fffff801`32cfb428Unable to load image gpt_loader.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for gpt_loader.sys *** ERROR: Module load completed but symbols could not be loaded for gpt_loader.sys gpt_loader+0xb428 5: kd> lmvm gpt_loader start end module name fffff801`32cf0000 fffff801`32d01000 gpt_loader T (no symbols) Loaded symbol image file: gpt_loader.sys Image path: gpt_loader.sys Image name: gpt_loader.sys Timestamp: Fri Nov 14 15:54:12 2014 (54661794) CheckSum: 000120DB ImageSize: 00011000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 ffffd000`461b6b88 fffff801`32ce3c0c*** WARNING: Unable to verify timestamp for apmwin.sys *** ERROR: Module load completed but symbols could not be loaded for apmwin.sys apmwin+0x3c0c 5: kd> lmvm apmwin start end module name fffff801`32ce0000 fffff801`32cf0000 apmwin T (no symbols) Loaded symbol image file: apmwin.sys Image path: apmwin.sys Image name: apmwin.sys Timestamp: Fri Nov 14 15:53:52 2014 (54661780) CheckSum: 0000D8AF ImageSize: 00010000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 ffffd000`461b68d8 fffff801`35c13524Unable to load image k57nd60a.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for k57nd60a.sys *** ERROR: Module load completed but symbols could not be loaded for k57nd60a.sys k57nd60a+0x43524 5: kd> lmvm k57nd60a start end module name fffff801`35bd0000 fffff801`35c42000 k57nd60a T (no symbols) Loaded symbol image file: k57nd60a.sys Image path: k57nd60a.sys Image name: k57nd60a.sys Timestamp: Wed Oct 30 08:14:03 2013 (5270B1BB) CheckSum: 0007BE28 ImageSize: 00072000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 ffffd000`461b5fd8 fffff801`339e2e96Unable to load image atikmpag.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for atikmpag.sys *** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys atikmpag+0x12e96 ffffd000`461b5c78 fffff801`36a3fd49Unable to load image atikmdag.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for atikmdag.sys *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys atikmdag+0x5fd49 5: kd> lmvm atikmpag start end module name fffff801`339d0000 fffff801`33a79000 atikmpag T (no symbols) Loaded symbol image file: atikmpag.sys Image path: atikmpag.sys Image name: atikmpag.sys Timestamp: Wed Nov 18 07:55:08 2015 (564C20CC) CheckSum: 000AFA19 ImageSize: 000A9000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 5: kd> lmvm atikmdag start end module name fffff801`369e0000 fffff801`37ef4000 atikmdag T (no symbols) Loaded symbol image file: atikmdag.sys Image path: atikmdag.sys Image name: atikmdag.sys Timestamp: Wed Nov 18 08:18:34 2015 (564C264A) CheckSum: 014AC40D ImageSize: 01514000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote]

 

What's Paragon? I'm not sure how to update or remove it because I've never heard of it? Also, When you say update broadcom, do you mean the builtin network adapter on my ASRock Motherboard? If so, shouldn't I use the network driver on my motherboards wetsite?

I'm thinking I might start over, fresh install of Windows 10 64. What drivers should I use for my mobo from my mobo site ASRock > Z77 Extreme6

Attachment 50796
Should I take out my Graphics Card and install windows with just my onboard graphics from my intel 3770k? I've never done this, so maybe it might be better to do this and once the OS is updated, then install the AMD 7950 graphics card and drivers.

I also made a zip file somewhere in this thread, it shows EVERY option within my BIOS. should I disable/enable/set something before installing windows 10? Knowing my situation, what do you recommend?

 

The driver related to paragon that I mean:
Driver Reference Table - gpt_loader.sys

A network card is always on the motherboard, but why do you think I mention to use a different site? *Smile
The network card is made by, in your case, Realtek. With desktops only install the drivers from the manufacturer of the component.
The mainboard manufacturer doesn't offer driver updates for the network card.

Always, unless specific specified which one not, install every driver for the motherboard.
Without any of the drivers, the parts won't work.

I'm not answering your last question, because it is a choice you should make. It doesn't actually matter, because Windows will use its own built-in graphics drivers until the graphics drivers have been installed.

 

Seems that these new driver issues arose after restoring my PC from a system image due to driver verifier causing Windows not to boot.


Could my monitor's cable that connects the PC to the monitor be causing the BSOD? My monitor is a a LG LED 22EA53 on the back on the monitor there are two possible connections, D-Sub and DVI-D. I'm using a cable with one end HDMI, that plugs into my AMD 7950 Graphics card, and the other end of the cable is a connected to the DVI-D input on the monitor.

Since I have 2 drives, 1 Samsung 950 500gb SSD(Operating system) and 1 WD 1TB HD(Data), if I were to start over from scratch, would I have to unhook the SATA connectors for the HD(Data) while installing windows on my SSD(Operating system)? I ask this because, in the past, I could not install Windows 7 or 8 if both drives were hooked up to the sata ports on the motherboard at the same time.

 

Wait. You said my network card is made by Realtek? I though it was made by Broadcom? Either way, the link you supplied to update it didn't give me any drivers to download.

I uninstalled ALL AMD drivers, then ran DDU in safe mode, I downloaded AMD's new Crimson drivers Desktop
and out of the two new install options, i chose to use AMD minimal setup option. I also updated the INF and ME motherboard drivers. I uninstalled the older realtek audio drivers, and when I rebooted, windows already download and installed their version of the audio drivers, which work. I find that weird considering under control panel/system/advanced system settings Hardware tab/ Device installation settings - I have the options checked for, let me choose what to do, and Never install drivers from windows update.

 

Well, an update: My Computer hasn't blue screen 0x0124 for almost a week. I guess Windows 10 had a major update, when I went to apply the new update, windows restarted about three times and the update installed correctly. However, I still have the revert back to Windows 7 option in my control panel. Is this normal, Or maybe, the OS isn't installed right, which is the causing the once a week blue screens. Here is the pick, does this seem right considering I've had Windows 10 on here for well over 4 months.

Attachment 52299

 

BSOD 0x0124 while playing Fallout 4. Here is the latest Dmlog

Also here is a report from AIDA64 Maybe it shows something

 

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the drivers using custom/advanced options.
Code: ffffd001`bb9dee18 fffff801`4e0630d2Unable to load image atikmpag.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for atikmpag.sys *** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys atikmpag+0x130d2 1: kd> lmvm atikmdag start end module name fffff801`50630000 fffff801`51d77000 atikmdag T (no symbols) Loaded symbol image file: atikmdag.sys Image path: atikmdag.sys Image name: atikmdag.sys Timestamp: Sun Nov 29 21:51:24 2015 (565B654C) CheckSum: 016DC5BB ImageSize: 01747000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote] Let me know how it goes.

 

I don't think the new crimson drivers allow this, out of the checklist of drivers on the AMD install wizard, What drivers should I check to install in custom/advanced options?

 

What are the options?
Crimson is very new and I haven't seen the options (laptop)

 

forget about crimson. lets just stick with their latest, non crimson driver, amd-catalyst-15.10beta I already installed it using the options shown. In custom install wizard, I only have AMD Display driver checked and AMD catalyst Install Manager is selected because you can't change that option. the pix shows what I installed, is this right?
Attachment 52513

 

I was just wondering if with crimson there were some more options.

That is right yes.

 

Windows Update wants to install AMD audio drivers. Should I allow or block the update since I didn't let the AMD install wizard install the audio update?
Attachment 52718

 

Not sure how vast your knowledge is with RAM timings, but I might be making some headway in another forum. If you go to the link and you see something that doesn't look right with the timings let me know.

http://www.gskill.us/forum/showthrea...ed=1#post77916

 

My knowledge with RAM timings isn't good, at least it doesn't come close to those at the thread you're linking to.