Windows 10: BSOD Stuck at 100% complete

My PC randomly went to the BSOD while I was working and now it’s stuck at 100% complete for the past half hour. I held down the power button for 10 seconds but did nothing. The stop code is CRITICAL_PROCESS_DIED. Any help would be appreciated.

submitted by /u/Ok_Independence1604
[link] [comments]

:)

 

Windows 10 Update hangs on startup, saying 100% completed

I have a new Fujitsu Lifebook series notebook, bought just about 2 months ago. I have only booted it roughly 10 times to install some basics (virus protection, and a couple of applications I'm going to need).

During my last session, I did not install anything, but I triggered Windows Update from the start menu to ensure all the latest updates are installed.

Unfortunately, Windows now hangs at a blue loading screen with a message like "Running updates, 100% complete, do not turn off the computer".

After this had been shown for some hours, I decided to do some troubleshooting, and, based on the suggestions in the numerous forum threads found online about Windows 10 update issues, I rebooted several times. However, nothing helped:

• Forced booting into the repair UI, then opened system recovery => the UI tells me I don't have any restore points.
• Forced booting into the repair UI, then chose the option to boot into safe mode => stuck at the "100% complete" screen.
• Forced booting into the repair UI, then chose to boot from a disk (with the recovery DVD provided by Fujitsu inserted) => stuck at the "100% complete" screen.
• Forced booting into the repair UI, changed UEFI settings to always attempt booting from a disk first, then rebooted (with the recovery DVD provided by Fujitsu inserted) => stuck at the "100% complete" screen.

How do I get past that "100% complete" screen, in order to get to a point where I can interact with the system to analyze and fix the problem?

Thanks for any suggestions!

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.

Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.

 

Upgrade to windows 10 Enterprise stuck in 100% Complete

Hello Team,

I’m upgrading my laptop to Windows 10 Enterprise. Below is the process that I followed:

• 
  My laptop had Windows 10 Pro.
  
• 
  Clicked Change product key or upgrade your edition on Windows.
  
• 
  Entered a valid Windows 10 Enterprise key.
  
• 
  Process started normally.
  
• 
  It’s stuck in Preparing for upgrade. 100% complete
  for around 14 hours.
  

Now, I really wonder what should I do now. What are your suggestions? How should I proceed from here? It’s already been more than 14 hours. Should I kill this process or wait? Will killing has any negative effects?

Thanks.