Windows 10: BSOD THREAD_STUCK_IN_DEVICE_DRIVER error

Are there BIOS updates?

No program interferes, system files are fine.

If the BIOS doesn't have updates and is loaded for optimal settings, then either somewhere a cable is loose, misconfigured or there is hardware damage.

 

Bios is fully updated and is loaded on default settings, double checked all cables and they're in the proper place and connected tight. Rams good, storage is good, power supply is good, my guess if its hardware either the APU is faulty or motherboard. Going to run Furmark again just to see if it'll do 30 minutes.

*update

...it only lasted 2:52

 

Please turn off fast boot if it is on.
Have you recently added new hardware or installed new software?
Please boot in safe mode and see if the problem occurs.

 

Fast boot is off and no, hardware was all added at the same time and only the software that we've been using to fix it.

 

I cant test the gpu in safe mode, drivers are disabled, should i change the options in safe boot then try again?

 

If you can enable the drivers in safe mode, give it a shot *Smile

 

Cant enable the drivers, tried multiple ways including reinstalling but its really limiting using graphics drivers unfortunately

 

Too bad.

Either the mainboard or the APU is faulty.
Can you replace the APU?

 

I'm still covered by the DOA for another 14 days so I'll try a bit more testing but I've contacted the people i bought it off of so we'll have to see

 

Managed to get hold of a old gpu to test if the apu had died, ran fine so yeah the apu is almost dead