Windows 10: BSOD's too many to count!!

Hi,
this issue started when i installed a graphics card on windows seven and is probably driver related.
originally i would regularly get "irql equal to or less" but that seemed to only happen on certain things like itv player and some games.
i took out the graphics and deleted the graphics drivers to install the onboard drivers but still had the same issue.
the last week i have had bsod on many things here are some of them:

driver overran stack buffer
system pte misuse
memory management
Edit : system service exception
another one: k mode exception not handled (this was while on desktop not dong anything).

some restarts say about an overclock failure other times it wont restart at all.

any help would be great,
thanks.
Attachment 84122

:)

 

Too many BSODS to count... Pointing towards memory corruption.

Frankly if we cant get the data your best bet is probably to wipe the OS and re-install

 

Too many BSODS to count... Pointing towards memory corruption.

There is yet another problem. I checked the "MEMORY.DMP" file and it was last edited at 12:40ish AM which is when my pc bluescreened about an hour after running verifier. So I ran verifier again just now and it still says that it was last edited at 12:40ish
AM.

Basically, running verifier did not have any affect on the "MEMORY.DMP" file.

Here it is if you still want it: https://1drv.ms/u/s!AoZ9Od5vFyzhgdQxdpcZ9pPVar9-QA

I have ran SFC and DISM in the past and they have fixed multiple things for me but the problems keep coming back. I ran SFC which found no problems then ran DISM which completed successfully and then ran SFC once more which came back clean.

 

Please remove all overclocking back to stock!

Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs

• CPU
• Mainboard
• Memory
• SPD*
• Graphics

*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.

Please post each screenshot in your next reply/replies.






Diagnostic Test

RAM TEST
*Arrow Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums



Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the error scan,
• the health,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

There are many crashes related to memory corruption and/or possible NTFS corruption, we'll need to rule out the memory and hard drive properly first
Code: ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff8002598a786, ffffd000ec9bc980, 0} Probably caused by : NTFS.sys ( NTFS!NtfsFsdCreate+16 ) Followup: MachineOwner 1: kd> !devobj ffffe001bac62060 Device object (ffffe001bac62060) is for: InfoMask field not found for _OBJECT_HEADER at ffffe001bac62030 \FileSystem\Npfs DriverObject ffffe001bac38470 Current Irp 00000000 RefCount 118 Type 00000011 Flags 00000240 Dacl ffffc10221b6ce71 DevExt ffffe001bac621b0 DevObjExt ffffe001bac62380 ExtensionFlags (0x00000800) DOE_DEFAULT_SD_PRESENT Characteristics (0x00020000) FILE_DEVICE_ALLOW_APPCONTAINER_TRAVERSAL AttachedDevice (Upper) ffffe001bb7acdf0 \FileSystem\FltMgr Device queue is not busy. CHKIMG_EXTENSION: !chkimg -lo 50 -db !Npfs 157 errors : !Npfs (fffff801120e3b2c-fffff801120e3c29) fffff801120e3b20 60 ab 00 00 8e ae 00 00 e8 3a 00 00 *00 *00 *00 00 `........:...... fffff801120e3b30 *00 *00 00 *00 *00 *00 *00 00 *00 *00 *00 *00 *00 *00 *00 00 ................ fffff801120e3b40 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 00 00 *00 *00 *00 00 ................ fffff801120e3b50 *00 *00 *00 00 *00 *00 *00 00 *00 *00 *00 00 *00 *00 *00 00 ................ fffff801120e3b60 *00 *00 00 00 *00 *00 00 00 *00 *00 00 00 *00 00 *00 00 ................ fffff801120e3b70 *00 *00 00 *00 *00 *00 00 00 *00 *00 00 00 *00 *00 00 00 ................ fffff801120e3b80 *00 00 *00 00 00 *00 *00 00 00 *00 *00 00 00 *00 *00 00 ................ fffff801120e3b90 00 *00 *00 00 *00 *00 00 00 *00 *00 00 00 *00 *00 00 00 ................ fffff801120e3ba0 *00 00 00 00 *00 *00 00 00 *00 *00 00 00 *00 *00 00 00 ................ fffff801120e3bb0 *00 00 *00 00 00 *00 *00 00 00 *00 *00 00 00 *00 *00 00 ................ fffff801120e3bc0 00 *00 *00 00 *00 *00 00 00 *00 *00 00 00 *00 *00 00 00 ................ fffff801120e3bd0 *00 *00 *00 00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 ................ fffff801120e3be0 *00 *00 *00 *00 *00 *00 *00 *00 *00 *00 00 00 *00 00 00 00 ................ fffff801120e3bf0 *00 *00 00 00 *00 *00 00 00 *00 00 00 00 *00 *00 00 00 ................ fffff801120e3c00 *00 00 00 00 *00 *00 00 00 *00 *00 00 00 *00 *00 00 00 ................ fffff801120e3c10 *00 *00 *00 00 *00 *00 *00 00 *00 *00 *00 *00 *00 *00 *00 00 ................ fffff801120e3c20 *00 *00 *00 00 *00 *00 00 00 *00 *00 00 00 10 3c 00 00 .............<.. MODULE_NAME: memory_corruption IMAGE_NAME: memory_corruption FOLLOWUP_NAME: memory_corruption DEBUG_FLR_IMAGE_TIMESTAMP: 0 MEMORY_CORRUPTOR: LARGE_256 FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE_256 BUCKET_ID: MEMORY_CORRUPTION_LARGE_256 PRIMARY_PROBLEM_CLASS: MEMORY_CORRUPTION_LARGE_256[/quote]
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

 

Thanks Axe0 for the reply.

Regarding the overclock, i have never had one installed so not sure why that message would have appeared.
I will get on with the other tests and will hopefully have some results for you by tomorrow.

 

Could you please check the frequency of your CPU, GPU & RAM in the BIOS and post them here so it can be checked *Smile

 

Here are the cpu-z specs:

Attachment 84476Attachment 84477Attachment 84478

Attachment 84471Attachment 84472Attachment 84473Attachment 84474Attachment 84475

 

Seatools was fine on all tests:

Attachment 84484

 

Please boot in the BIOS and make sure the optimal default settings are loaded.

 

check disk log:
Attachment 84487Attachment 84488

 

Just seen this, will do. thanks.

 

i had a look at the bios but now not sure what you mean. ive got the option of F5-setup defaults ? (i clicked it but not sure if it changed anything).
i could post screenshots and see if you think i should change any of the options? im not sure what should be enabled/disabled.

 

hd tune results:

Attachment 84496Attachment 84497Attachment 84498

 

All that is left on the list is memtest.
i will hopefully have this done by tomorrow evening.

 

Please fill in your system specs as I asked for in the first post.