Windows 10: Bugcheck 0x0000009f dump file suggesting uaspstor.sys at fault

Hi everyone,

I have been having an issue resulting in a BSOD "Bugcheck 0x0000009f" occur on my Windows 10 setup. I have a bit of a convoluted setup here: firstly I am running on a MacBook with bootcamp installed. It is running perfectly other than when I have my USB devices connected, now comes the complicated part, and I am hoping that you may be able to offer me advice in how to better configure this setup:


Firstly, I have an eGPU connected to the MacBook via a Thunderbolt 3 cable, which is working fine and I haven't had any problems with (all drivers are up-to-date, etc).


This is where I believe the problem resides -- Second device I have connected to one of the Thunderbolt 3 ports is a USB-C 10 port externally powered USB-3.0 hub, that currently has 9 devices plugged into it.

• 2 Devices are gamepads
• 1 Device is a keyboard
• 1 Device is a mouse
• 1 Device is a Samsung T5 SSD
• 1 Device is a WD External HDD
• 1 Device is an inateck 2 slot Internal HDD adapter with 2 HDDs installed (has its own dedicated power supply)
• 1 Device is an internal to external (USB) NVMe adapter with a 960 Evo installed
• 1 Device is an external pad / cooling station for the MacBook

Here is a link to the dump (.dmp) file if anyone is interested:

https://1drv.ms/u/s!AuO36xP9HQjxjgtMyTBXZSArLftG

After I briefly glanced at it, it appears that uaspstor.sys is the culprit.


If there is anything apparently wrong with this setup please let me know. I am thinking that maybe (even though the hub is externally powered) I have too many demanding devices connected to it. Otherwise please let me know what you think. Any help is appreciated,

Thanks!

:)

 

BSOD - bugcheck 0x0000009f

I am continuously getting a BSOD when I turn on my computer and when I wake it from sleep. It doesn't happen all the time, but it happens on occasion. Here is what I get:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xffff8583d77413e0, 0xfffff80022d7d960, 0xffff8583df152010). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: cf3d642f-05d3-4493-9052-d86ed1c9b08f.

When I look at device manager I see no yellow exclamation points indicating a bad driver of some sort.

I'm not quite sure how to post the exact memory dump file on here.

Any leads would be greatly appreciated.

Thank you!

 

Bugcheck 0x0000009f since cumulative update for Windows 10 kb3081448

My PC has started to hang while asleep since the installation of the Windows 10 cumulative update KB3081448. When I reboot I find an entry in the event log reporting Bugcheck 0x0000009f:

"The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x00000003, 0x8d3fb030, 0x836b9af0, 0xe62f83d8). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 091115-29468-01"

 

The computer has rebooted from a bugcheck. Help Reading A Dump File

Well, I had an unexpected shutdown this morning:

The previous system shutdown at 7:31:39 AM on 4/7/2017 was unexpected.

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xffffc084a2fde060, 0xfffff803b34f7960, 0xffffc084b2d5f850). A dump was saved in: C:\WINDOWS\Minidump\040717-44281-01.dmp. Report
Id: 5059921c-de29-44de-9893-1ad43c5523be.

I then ran SFC /scannow with the following result: "Windows Resource Protection did not find any integrity violations."

Any suggestions on how I should proceed from here?