Windows 10: Built-In Audio Device not showing up in all sound devices after BSOD and update

08/16/2024 My laptop had restarted and then updated. Before the update the audio devices/drivers were working fine, but after the update the audio devices didn't work and the driver for the built-in speaker did not appear in the "All Sound Devices" setting.

:)

 

No audio output device

Hello!
I have a common problem: my Windows 10 has No Audio Output Device.
System configuration:

• Lenovo Legion Y520-15IKBN (laptop)
• Windows 10 Pro, version 1909, build 18363.535;
• Current updates;

Device manager shows these audio devices:

• High Definition Audio Device (driver version 10.0.18362.356)
• Intel Display Audio (10.27.0.6)
• ASUS Xonar U3 (10.0.8.2164)

i.e. the problem persists even with an external (USB) audio device, recognized by the system.

I performed a sanity check on this issue. Sound works when I boot into Ubuntu live. Therefore, it is not a hardware problem, and is indeed a Windows problem.

Solutions that have not worked so far:

1. Audio troubleshooter (issues found: check audio device, nothing else)
2. Rolling back drivers
3. Uninstalling audio devices
4. Uninstalling any audio-related devices, incl. the likes of bluetooth speakers
5. Updating audio drivers (from both built-in drivers and from manufacturer's site)
6. Installing a generic audio device (installing a generic USB audio device does not succeed, and installing a generic Realtek device resulted in a BSOD)

Do you have any ideas for fixing this?

 

Re-enable audio device

Hi,

I would be happy to assist you.

Before we proceed with troubleshooting, I would need little information on the issue.

• Are using speakers / head phones to listen to audio?

If you have disabled the audio device, then you might not see it under the list of playback devices. I would suggest you to follow these steps to make sure you see the disabled devices:

• • 
    Open
    Control panel.
    
  • 
    Click Hardware and Sound and then Click on
    Sounds.
    
  • 
    Under Playback tab, right click on the empty area and make sure
    “Show Disabled Devices” has a check mark on it. If headphones/Speakers are disabled, it will now show up in the list.
    
  • 
    Right click on the device and
    Enable it. Click OK.
    

If the issue still persists, try enabling speakers automatically using steps below.

• 
  Go to Settings> Click on themes> Advance sound settings> right click on the speakers or the audio device youo have connected > click on
  Configure device.
  
• 
  Test the sound level you want, click Next.
  
• 
  And configure the audio devices.
  

Hope this helps you. Do reply if you need further assistance on Windows 10.

Thank you.

 

No audio output device is installed

Hello!

I have a common problem: my Windows 10 has No Audio Output Device.

System configuration:

• Lenovo Legion Y520-15IKBN (laptop)
• Windows 10 Pro 1909 build 18363.535;
• Current updates;

Device manager shows these audio devices:

• High Definition Audio Device (driver version 10.0.18362.356)
• Intel Display Audio (10.27.0.6)
• ASUS Xonar U3 (10.0.8.2164)

i.e. the problem persists even with an external (USB) audio device, recognized by the system.

Solutions that have not worked so far:

1. Audio troubleshooter (issues found: check audio device, nothing else)
2. Rolling back drivers
3. Uninstalling audio devices
4. Uninstalling any audio-related devices, incl. the likes of bluetooth speakers
5. Updating audio drivers (from both built-in drivers and from manufacturer's site)
6. Installing a generic audio device (installing a generic USB audio device does not proceed at all, and installing a generic Realtek device causes a BSOD)

Do you have any ideas for fixing this?

UPDATE (01.01.2020):

I performed a sanity check on this issue. Sound works when I boot into Ubuntu live. Therefore, it is not a hardware problem, but a confirmed Windows problem.