Windows 10: Cannon PRO9000 printer connected but not printing

Somebody help before I throw the computer out of the window. Printer will not print. Everytime I select print an error comes up but I can't find out why. Printer is switched on, working and connected to USB. All inks are working. all paper settings are correct. Have turned computer off and back on. help

:)

 

Cannon Printer wont connect to Router

Cannon Printer wont connect to Router

I am trying to get my Cannon Pixma MG6650 to print Wireless using my Router its a Netgear N300.

I have the correct drivers from Cannon but when i run through the Setup at the end it says it cant find it on the Network.

Cannon told me to go to this link:
https://www.canon.co.uk/support/con...6650.aspx?type=faq&faqdetailid=tcm:14-1193197

but this is not much help since this is the first time i have ever had to set up a Wireless Printer. I am NOT a newbie to PC's. It works fine via a USB. But this was not why i bought it.

Its Windows Ten 64 Pro. I go through all the Cannon Setup Programe and it detects the Access Point but when it get to the end of the Setup with the Printers on Network list it is not on it.

I have tried what it says to do if the Setup can't find it clicking Next, Update, Setting printer could not be found on the list. It still will not work.


Cannon said do this:

First please press the HOME button:

1. Select ‘Setup’ and press OK

2. Select ‘Device Settings’ and press OK

3. Select ‘LAN Settings’ and press OK

4. Select ‘WLAN Setup’ and press OK

5. Select other connection methods and select ‘Standard’

6. Select your access point

7. Enter your password and connect

The password is located on the back of your router.

Once you have connected your printer to the wireless network, please download and install the drivers on every computer you would like to use with your printer, select the wireless connection method in order to print wirelessly.

The link for the drivers were sent to you in a previous email.

-------------------------------------------

I go through all the Cannon Setup Programe and it detects the Access Point but when it get to the end of the Setup with the Printers on Network list it is not on it.

I have tried what it says to do if the Setup can't find it clicking Next, Update, Setting printer could not be found on the list. It still will not work.

I have ran a Program called Advanced IP Scanner. It shows My Router, Network Adapter, Ipad,
Cannon Printer the IP's and MAC Address.

When i Ping the Printer from the Program i get: Request Timed Out, Packets Sent = 4 Received = 0 Lost = 4 100% Loss.


I am at a Loss.

 

cannon mp240 printer scanner

Please try the steps recommended below to uninstall printer software

Press Windows key + X, click Apps & Features or Programs and Features

Select your cannon printer.

Select Uninstall.

Press Windows key + R, type control, hit Enter

Open Devices and Printers.

In the Devices and Printers window look for your cannon Printer. If you see it listed, right-click on it and choose "Delete" or "Remove Device.”

Open up the run command with the "Windows Key + R" key combo.

Type printui.exe /s and click OK.

Click on Drivers tab.

Look for cannon Printer driver. If you see it click on it and click Remove at the bottom.

Select OK.

Select Apply and OK on the Print Server Properties windows.

Close Devices and Printers.

Proceed to reinstall the driver.

 

Cannon multi-function Imageclass MF4350d unit the printer works, but scanner doesn't

Although these steps fixed the problem, the fix didn't last. When I went to use the scanner a week or so later and after rebooting each day, the scanner would not connect. I get "Establishing a connection with WIA Cannon MF4320 - 4350", but it never connects.
I can't close the popup window or the Windows Fax and Scan program unless I open Task Manager and "End Task" for the Windows Fax and Scan application. I brought up Devices and Printers window. I right click on the Cannon device which is the default printer
and left click on properties. A Cannon properties window opens. It shows a Device Function box with 8 items listed as follows:
Name Type Location

Cannon MF4320 - 4350 Print queues on Canon MF4320-4350

Cannon MF4320 - 4350 Imaging device 0000.001a.0000.001.003.000.000.000.000

Cannon MF4320 - 4350 Printers on USB Printing Support

Cannon MF4320 - 4350 (Fax) Print queue on Canon MF4320-4350 (FAX)

Cannon MF4320 - 4350 (Fax) Printers on USB Printing Support

USB Composite Device Universal Serial Bus controller Port_#0003.Hub_#0004

USB Printing Support Universal Serial Bus controller 0000.001a.0000.001.003.000.000.000.000

USB Printing Support Universal Serial Bus controller 0000.001a.0000.001.003.000.000.000.000

Is the imaging device location correct?