Windows 10: Cannot print 0x00000bbb even after several formats

Discus and support Cannot print 0x00000bbb even after several formats in Windows 10 BSOD Crashes and Debugging to solve the problem; Hey, as you can tell by the title, i cannot print. i've tried literally every suggestion on the internet, but nothing works. you can also see ive... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by Melting Ice, Jan 22, 2021.

  1. Cannot print 0x00000bbb even after several formats


    Hey,

    as you can tell by the title, i cannot print. i've tried literally every suggestion on the internet, but nothing works. you can also see ive tried reformatting many times. i have never seen this before, it worked fine when i was using windows 7. i first noticed it about a week and a half ago, on 20h2 v2. so i tried 20h2 v1 on a clean install. then i tried 1909 which im using right now and it still has the same error.


    i have two questions:

    1 what could be causing this, and
    2 how the hell does this persist across reformats


    in case you're wondering, it works fine on other computers, and an install i have an another disk. just not on this one. this problem is making me really angry

    :)
     
    Melting Ice, Jan 22, 2021
    #1
  2. Fernandz Win User

    How To Format A Write Protected Flash Memory ?

    ¿You already tried this one?...

    Run CMD


    1. diskpart
    2. list disk

    Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

    2. select disk #
    3. clean
    4. create partition primary
    5. select partition 1
    6. active
    7. format fs=fat32
    8. assign
    9. exit

    with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

    good luck!
     
    Fernandz, Jan 22, 2021
    #2
  3. Unable to print after a windows 10 upgrade - 0x00000bbb Unable to create a print job

    Hi! I recently upgraded to Windows 10 from Windows 7 a few days ago. I have a Canon MF8200C Series printer configured for use by this home pc. The printer is connected via ip (local lan). The printer worked fine on Windows 7 for years. After upgrading
    the pc to Windows 10, I've been unable to print. I receive a "operation could not be completed error (0x00000bbb). Unable to create a print job" message when attempting to print a test page via the "Printers & Scanners" UI.

    In C:\Windows\System32\spool\PRINTERS, I see a file called FP00000.spl appear after attempting to print a test page. The file is 0 bytes, with the file owner as SYSTEM.

    So far, I've attempted to:
    1) stop the spool service and remove the file from C:\Windows\System32\spool\PRINTERS, then restart the spool service and try again. then restart the pc.
    2) removed the printer and attempted to rediscover (successful) and reinstall the printer (successful). then attempt to print a test page.
    3) adjusted the permissions to C:\Windows\System32\spool\PRINTERS for all users to "Full Control", then restart the pc and tried again.
    4) remove the printer, install the latest drivers from Canon's website (MF8200CMFDriversV2085W64usEN, if necessary to know) for the MF8200C Series printer, then restart the pc and tried again.

    5) contacted Microsoft Advisors (via the live chat) for help earlier today, who suggested copying PrintConfig.dll (it was 2.74MB) from C:\Windows\System32\spool\drivers\W32X86\3 to C:\Windows\System32\spool\drivers\x64\3 and restart the pc and tried again.

    6) went into Print Management (printmanagement.msc) and found ghost printers (Printers that do not appear in the Windows 10 "Printers & Scanners" UI, but are registered in the OS nonetheless). I removed all ghost printers, all their drivers, and all the
    ports in use by the ghost printers. I then tried a fresh install of the printer drivers from Canon, and attempted to print a test page.

    all of these attempts result in the same condition: Windows reporting "Operation could not be completed error 0x00000bbb. Unable to create a print job" when attempting to print a test page.

    I'm convinced the problem is _not_ with the printer. There's another pc in my home running Windows 10 that is able to print to this printer without any issue, and I've successfully printed to this printer on this pc pre-upgrade to Windows 10. At this point
    i'm stuck and could use additional help. Any thoughts are appreciated!
     
    JacobYackenovich, Jan 22, 2021
    #3
  4. Cannot print 0x00000bbb even after several formats

    Print to PDF missing in Printer List

    Hi William,

    We suggest that you disable and re-enable the Print to PDF feature. Here are the steps:

    • Click on the Start menu and type in Windows Features.
    • Choose Turn Windows features on or off.
    • On the next window, find Microsoft Print to PDF and disable it. Click
      OK to save changes.
    • Restart your PC.
    • Repeat the same steps to re-enable Microsoft Print to PDF.
    If the issue persists, we suggest that you perform the troubleshooting steps suggested on the link below under
    Advanced:

    Fix printer problems

    Regards.
     
    Rolando Vil, Jan 22, 2021
    #4
Thema:

Cannot print 0x00000bbb even after several formats

Loading...
  1. Cannot print 0x00000bbb even after several formats - Similar Threads - Cannot print 0x00000bbb

  2. My pc blocks ... even after formatting

    in Windows 10 Support
    My pc blocks ... even after formatting: Hello, my problem it is impossible to use my pc even after a formatting and a clean installation of windows; as soon as I launch windows after the formatting and after the installation of all the drivers and I return on a navigator firefox or thor then my pc blocks directly...
  3. Sound does not work even after several fix attempts

    in Windows 10 Drivers and Hardware
    Sound does not work even after several fix attempts: After installing a new video card sound does not work: The icon has an X. The troubleshooter does not work Device Manager says This device is working properly Driver update/restart failed several times - both Windows driver and from Right clicking the Sound icon it says...
  4. Windows 10 User Profile Cannot Be Loaded, issue happen again even after format

    in Windows 10 Customization
    Windows 10 User Profile Cannot Be Loaded, issue happen again even after format: Hello Every one, i have a big problem with my PC, i got this message trying to connect to my session , User Profile Cannot Be Loaded. i tried to fixe the issue with safe mode and regdit, but my PC restart when i tried to modify the key in the register, so i did reset my...
  5. Several system cannot print after update

    in Windows 10 BSOD Crashes and Debugging
    Several system cannot print after update: I have many retail locations calling about not being able to print. Some are getting the message: "Windows cannot print due to a problem with the current printer setup". Others, the application in which they are in either crashes or they receive a message from the app that...
  6. Unable to print after a windows 10 upgrade - 0x00000bbb Unable to create a print job

    in Windows 10 Drivers and Hardware
    Unable to print after a windows 10 upgrade - 0x00000bbb Unable to create a print job: Hi! I recently upgraded to Windows 10 from Windows 7 a few days ago. I have a Canon MF8200C Series printer configured for use by this home pc. The printer is connected via ip (local lan). The printer worked fine on Windows 7 for years. After upgrading the pc to Windows 10,...
  7. HDD 50 percent used even after format

    in Windows 10 Network and Sharing
    HDD 50 percent used even after format: (WIN 10 PRO with GPT HDD) I recently added SSD to laptop and replaced optical drive with HDD(old one with the help of caddy). Installed new win 10 pro to SSD and formated the HDD with the help of Mini Partition tool. Even after format it show 50 percent used. Not able...
  8. Several BSOD issues, even after formatting Windows 10 and reinstalling all the latest drivers

    in Windows 10 BSOD Crashes and Debugging
    Several BSOD issues, even after formatting Windows 10 and reinstalling all the latest drivers: Hello, I recently started experiencing random BSOD events on my computer. It happens at random times; more frequently while playing games, but also when browsing online. Here are the steps that I've tried: Format Windows 10 Install/Update all drivers Run tests to...
  9. Cannot print after 1803

    in Windows 10 Drivers and Hardware
    Cannot print after 1803: Several people I help with their computers have lost the ability to print after the April/May 2018 update to version 1803. Some of them tell me the problem 'fixed itself' after a couple days. Three people still cannot print after a couple weeks. One person has an HP Color...
  10. Random Reboots Even After Format

    in Windows 10 BSOD Crashes and Debugging
    Random Reboots Even After Format: Hi apologises if this is in the wrong section but ive just recently sold my gaming pc on ebay and want to resolve the issue before shipping out so last night came to switch the pc on after many months of not using it and it kept coming up onto a blue screen windows has...