Windows 10: Can't access my OS at all

I just updated to the latest version (it ends with 9 i think) and now i'm stuck in the login screen. Every time i log in the screen goes black and then it immidately takes me back to the login screen, sometimes a glitch thing pops up at the top of the screen before taking me back to the login screen. I'm stuck and don't know what to do.

:)

 

2 x SSD Raid 0 - is this right?

Hey Fits

Can you list a few helpful hints for T ski ,maybe a step by step how to OR what to look out for*Cool

 

2 x SSD Raid 0 - is this right?

T ski b4 your done with this post can you list a step by step fix of what you did, I would appreciate it if you would...Thanks

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".