Windows 10: Can't run services, gpedit (and possibly other) run app commands

Discus and support Can't run services, gpedit (and possibly other) run app commands in Windows 10 Support to solve the problem; Typing at least two items in the "run" window desktop app (win/r) brings issues. - when I type 'services' = nothing (not even a window or an error... Discussion in 'Windows 10 Support' started by jerriy, Feb 5, 2019.

  1. jerriy Win User

    Can't run services, gpedit (and possibly other) run app commands


    Typing at least two items in the "run" window desktop app (win/r) brings issues.

    - when I type 'services' = nothing (not even a window or an error message).
    - when I type 'gpedit.msc' = error message popup/dialogue that it can't find the program

    Yet I can open these services and gpedit commands directly (by typing the dot msc in the win/serarch bar or via clicking menu in control panel (thus without using the run app). In the mean time run continues to work normally with some other commands (like 'explorer').

    And also when I do end up opening the gpedit.msc app I still get a prioblem: a blank window with only the menus appears accompanied only by a red colored "x" dotted message "mmc could not create the snap-in".

    :)
     
    jerriy, Feb 5, 2019
    #1
  2. Kem Mon Win User

    Text Services Framework not running and no connection to Internet

    Hi Alrescha,

    It is possible that the
    system files
    and
    components were corrupted during the installation or update. We suggest
    that you perform these methods of troubleshooting
    and check if there are any
    changes:

    For network connection issue:

    Method 1: Reset TCP/IP

    To do this, follow these steps:


    • Run
      Command Prompt
      as
      Administrator.

    • Run
      this command:

      • netsh int ip reset
        and hit
        Enter.

    Exit
    Command Prompt
    and
    monitor your Network Connection.

    Method 2: Disable auto turn-off of Network device.

    Go to
    Network and Sharing Center. At the
    right pane, click
    Change adapter settings.
    Right-click
    on your
    connection/network name
    and go to
    Properties.Click
    the
    "Configure..."
    button and go to
    Power Management
    tab.Uncheck/disable
    the
    radio button
    for
    "Allow this device to turn off this device to save power". And then,
    Restart the PC(Important).

    Method 3: Reconfigure TCP/IP

    To do this, follow these steps:


    • Run
      Command Prompt
      as
      Administrator.

    • Run
      these following commands:

      • netsh int tcp set heuristics
        disabled

      • netsh int tcp
        set global autotuninglevel=disabled

      • netsh int tcp set global
        rss=enabled

    For keyboard issue:

    Method 1:
    Run SFC Scan.  

    SFC
    will
    scan
    and
    run
    an
    automatic repair
    to any
    corrupted system files
    that it will detect. We suggest that you perform it twice. To run an
    SFC scan, follow these steps:  


    • Run
      Command Prompt as Administrator.  

    • Type
      sfc /scannow
      and hit
      Enter.   

    Note:
    Kindly run
    SFC twice or thrice and check for results before you proceed to the next method.

    Method 2: Reset Windows Update Components.

    Resetting your
    Windows Update Components
    will allow you to
    install
    the update again including the
    Text Services Framework. To do this, refer to
    How do I reset Windows Update Components.
     
    Kem Mon, Feb 5, 2019
    #2
  3. DaveM121 Win User
    my gpedit is not run.

    Hi prajapatiashok,

    If you are running the Home version of Windows 10, you will not find gpedit it is only available in the Pro and Enterprise versions . . .

    Is there something you need to be done in gpedit - usually that can be done in the Windows Registry also . . .
     
    DaveM121, Feb 5, 2019
    #3
  4. Can't run services, gpedit (and possibly other) run app commands

    Microsoft Jigsaw and Solitaire apps will not load and run

    Hello,

    Thank you for posting your query in Microsoft Community.

    As you are facing issues with Windows store download and Windows updates too, I suggest you to follow the below steps and check if it helps:

    Step 1: Try clearing the Store Cache:

    • Press the Windows key + R keys.
    • In the Run window, type
      WSReset.exe
      and click “Ok”.

    Step 2: Also I would suggest you to run
    Windows Store Troubleshooter and check if it helps:

    1. Type Troubleshooter in the
    search bar
    and click on it from the list.

    2. Click on view all and select
    Windows Store Apps
    and click next.

    3. Follow the onscreen instruction.

    Step 3: Run Windows Update Troubleshooter

    I suggest you to run the Windows Update Troubleshooter. Follow these steps to run Windows Updatetroubleshooter:

    • PressWindows key + W and type troubleshooting.
    • Select Troubleshooting.
    • Select View all on the top left corner.
    • ClickWindows Update troubleshooter.
    • Follow the on-screen instructions to run the troubleshooter.
    • Check if issue persists.
    Step 4:

    I suggest you to check if the services responsible for Windows update is running. Refer to these steps:

    • Press Windows key +R, type “services.msc
    • Locate the BITS, Cryptographic, MSI Installer and the
      Windows Update Services and check if it is running.
    • If not, right click on the service and click start to start the service.
    Hope this will fix the issue, if not let us know with the updated status and we will be happy to assist you further.

    Thank You.
     
    Sangeeta Sarkar, Feb 5, 2019
    #4
Thema:

Can't run services, gpedit (and possibly other) run app commands

Loading...
  1. Can't run services, gpedit (and possibly other) run app commands - Similar Threads - Can't run services

  2. Can't run services.msc and gpedit.msc (and possibly others

    in Windows 10 Support
    Can't run services.msc and gpedit.msc (and possibly others: The "run" desktop command app has gone awry. Typing at least two items in the "run" window brings nothing (not even a window or an error message). I can open these services and gpedit commands directly (by typing the dot msc in the win/serarch bar or via clicking menu in...
  3. audio service not running

    in Windows 10 BSOD Crashes and Debugging
    audio service not running: on the speaker there is a cross and when you hover over it says audio service not running and in local services when you try to manually start it it fails and displays error 0x80070005 and ive tried all methods ive seen and none work. what should i do?...
  4. My apps can't run.

    in Windows 10 BSOD Crashes and Debugging
    My apps can't run.: The apps i have been using of recent the Bluestacks and Wampserver are nolonger working on my pc and there are telling the version am using is not for the pc am using yet of recent they have been working and there of 64bit and my pc is also of 64bits. What can i do?...
  5. Audio Services Not Running

    in Windows 10 Drivers and Hardware
    Audio Services Not Running: I had audio service until ~7-10 days ago. I think that a Windows update changed the settings. I have tried EVERYTHING to restore or re-install the audio. I even tried a System Restore without success even though I disabled Defender (which blocks a System Restore). What...
  6. my gpedit is not run.

    in Windows 10 Drivers and Hardware
    my gpedit is not run.: I very try to run my gpedit but is not found in my windo 10. way it can be possibal ? https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/my-gpedit-is-not-run/17913733-edb5-4eac-a192-166a07d9f631
  7. Is it possible to run UWP apps as a different user using runas command

    in Windows 10 Software and Apps
    Is it possible to run UWP apps as a different user using runas command: I would like to know if it is possible to run Universal Windows Platform apps with a different user using the runas command. Thanks. 114099
  8. Can't run command in PowerShell but OK in Cmd

    in Windows 10 Support
    Can't run command in PowerShell but OK in Cmd: [img] [img] The screen shots show results of running Code: "C:\Program Files\AVAST Software\Avast\ashCmd.exe" /@=Quick[/quote] in both PS and Cmd. The problem is I have made a task in Task Scheduler to run this command daily and, apparently, Task Scheduler insists on...
  9. Running Commands as an Administrator

    in Windows 10 Support
    Running Commands as an Administrator: I've just downloaded my Windows 10 upgrade and can't send mail through Outlook 13. On a forum I was told to run the sfc command but when I tried, I was told that I'm not an administrator. Mine is the only account on my PC, so surely I must be. Help please! 16164
  10. What is this service that's running?

    in Windows 10 Support
    What is this service that's running?: [img] "Windows Back Up" i feel like its taking a lot, is it safe to disable? what is it exactly? Im sure i disabled all my back up stuff 101021