Windows 10: Can't Seem to Format a New HDD

I get this message:


Device SCSI\Disk&Ven_&Prod_ST2000DM008-2FR1\5&2b637674&0&050000 was not migrated due to partial or ambiguous match.



Last Device Instance Id: USBSTOR\Disk&Ven_SanDisk&Prod_Ultra&Rev_1.00\4C530001061220111581&0

Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}

Location Path:

Migration Rank: 0xF000FC00FFFFF130

Present: false

Status: 0xC0000719





How do I resolve this?

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

External HDD needs format

Hi there @menu

from Windows command mode

1) Diskpart
2) list Disk
3) select disk <disk4> I think it would be in your case
4) clean
5) convert gpt (optional step but I prefer gpt HDD's these days even just for data disks)
6) create partition primary
7) format fs=ntfs quick
8) assign
9) exit

now you should have HDD ready for use and assigned a disk letter.

you don't need to create an efi partition for this disk either.

Cheers
jimbo

 

Format of USB HDDs failing

Thanks for the suggestion, .. I hadn't tried that.

I deleted the driver and then reconnected a USB external HDD, the PC loaded a new driver, but alas, I still can't format an external HDD

Regards
Doug