Windows 10: Cleaning a USB Drive

On prior Windows versions I had the ability to clean and optimize a USB flash drive. How do I do this on Windows 10?

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

clean possibly infected flash drives and CD-RWs

Your steps in post #1 should work for 99% of viruses that may be on a usb flash drive. However, there are a very few viruses that can infect the MBR of a drive. I would use Diskpart from a command prompt (Admin) to clean them. In the command prompt type DISKPART then, at the Diskpart prompt use the commands:

LIST DISKnote the disk number of the usb and use it in place of # in the command:SELECT DISK #
CLEAN
CREATE PARTITION PRIMARY

After this you will have cleaned the partition table from the usb and created a partition using the whole of the the available space. You can then format this partition in File Explorer.


For a CD-RW, if you right-click on it in File Explorer there is an Erase option.

 

help. USB drive isn't assigned a drive letter.

Any usb flash drive I plug into my computer isn't assigned a drive letter. The physical drive shows in the "safely remove hardware" but it doesnt show up in disk management. I have tried to populate the volume thru the safely remove hardware properties window and it does pop up in the list but it doesn't stay there. This isn't a format or assign a letter problem. It's more complicated then that. Maybe one of the services needed for usb drive management was disabled? Suggestions needed. btw external usb harddrives work fine.