Windows 10: Cloning issue?

I have a laptop which had 1tb HDD and 128gb SSD but i recently installed a new 1TB m.2 SSD but the issue i had was 128gb SSD was still the booting drive so in order to switch to the new 1TB ssd i used the macrium reflect software just followed the installation told them the disk and target disk but it messed up my partitions, it deleted everything on my new 1TB SSD E drive and now it just shows C drive 128gb ssd and my D drive 1tb regular HDD and instead of my E drive it shows F which is 117gb instead of 1TB now, im very confused as im not good in tech related stuff.

:)

 

Moving to SSD. Clone or not to clone?

I kinda agree with you, but on a wholr, do not. While I have done things a bit differently than this specific situation, by installing Windows directly to the SSD, and cloning after, my testing shows that there are no issues doing this, very little that can go wrong, provided your system is stable.

There are certain features that must be disabled in this situation, like auto defrag and such, but even with a fresh install to the SSD, you need to take steps to ensure that you SSD performs properly, regardless of how the data got there.

Arming yourself with a bit of knowledge can go a long way.

Installing the latest chipset driver, and the RST Tools, will ensure optimal performance of the SSD. but rather than taking my advice, I suggest the OP takes a look here:

http://blogs.dirteam.com/blogs/sand...7-and-ssds-to-clone-windows-or-reinstall.aspx

Installing The SSD - Install A Solid State Drive In Your Notebook | Tom's Hardware

Keep in mind, also, Digibucc, that many retail drives include software and such that very specifically is to be used to ttranser the OS from an existing mechanical drive to an SSD, and if there really was alot fo issues stemming from the cloning process, they would not have packages like that, simply to eliminate tech support costs. While not the optimal option, cloning is NOT a bad thing, as long as you take the nessecary steps.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Moving to SSD. Clone or not to clone?

Part of how I keep my SSD fast is to clone it to a platter drive, then clone back. You just want to make sure that you are only cloning teh used space, and not the empty space.


So, again, I isntall Windows to the ssd. Clone to platter drive, then clone back.

I am not sure why, but if I do not do the clone step, the drive's speed, and windows booting, decreases substantially within a week or so.

I am using a Corsair F60 SSD and a Western Digital 500AAKS as drives, and using the free version of Acronis that WD provides, if any of that matters. I am not sure, at this point.