Windows 10: CMD

Command prompt opening and directly closing when opened.

:)

 

Windows and CMD- renaming a file in CMD

Steps I've done

Here what happens

• 
  turn on PC
  
• 
  start windows
  
• 
  get blue screen ( message NTFS file)
  
• 
  it reboots returns to diagnosing PC
  
• 
  Diagnose and repair fails
  
• 
  I move to advance options
  
• 
  will not reset windows , I click on CMD
  

things I've tried
commands:

reagentc /disable

reagentc /enable

*************************FAILED
not recognized
**********************************

Please advise

• 
  

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Win10 - shutdown network card via CMD

For now, I need your help by doing the following to further isolate your concern:

Step 1 - Reboot the Network Device.

• Switch off your modem or router, wait for 10-20 seconds and plug it back in.
• Wait for about 30 secs to reboot.
• After rebooting your router, proceed to the next step below.

Step 2 - Ping www.microsoft.com
server then tell us the result through a screenshot.

• Press Windows key + R to open the run window.
• Type cmd, then press Enter.
• Type ping www.microsoft.com
  and press Enter.
  
  • If you receive 4 replies, it means the site is working properly.
    
  • If you got a request time out, it means that your connection has issues.

Step 3 - Scan your PC for viruses and malwares by using Windows Defender.

• Click Ask me anything.
• Type Windows Defender, then click it.
• In Home tab, click Full then click Scan now.
• Wait for the process to finish. If there are any findings after the scan, send us the screenshot.

Get back to us if you can perform these steps.