Windows 10: Computer having BSOD issues

Hello, Lately my computer has been having BSOD issues and has been frequently crashing and rebooting. When I start the computer back up, it says this in event viewer:The computer has rebooted from a bugcheck.The bugcheck was: 0x00000119 0x0000000000000002, 0xffffffffc000000d, 0xfffff306e8a22960, 0xffffd68f80da7bb0. A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 94ea6506-e652-4b58-835a-c94ee1e52ac3I am not sure at all what could be causing this, I also have a minidump file that you can access hereMP File for BSODIf someone can please take a look and let me know if they have any idea

:)

 

BSOD on new computer while gaming

I just got a new computer about a month ago. Everything is new and I get BSOD (windows 10) while gaming mostly although it sometimes happens while I'm just using the computer. Sometimes the computer doesn't BSOD and just gives me a Access Violation Error. Not sure if related.

Here is the link to download output files from the V2 script.

Dropbox - windows crash - Simplify your life

Any help is appreciated

Steps I have taken:

• Updated all drivers and bios to latest versions

• Checked ram with windows memory test to see if ram is faulty. (A stick was and it was removed waiting for replacement)

• Clean Installed Windows after finding faulty ram

• I had 2 x 2080Ti installed, I removed one, tested and then swapped cards; issue still exist

 

BSOD- atikmpag.sys

This is most likely due to an installation/upgrade error with ATI driver's. I suggest doing DriveSweeper and the following:

• Drivesweeper all drivers & in Safe Mode
• Unistall all drivers that aren't used in DriveSweeper (CCC Profiler Updates, MSI AfterBurner, anything related to ATI that use's it's drivers.)
• After you do this, the first thing you need to do is go into Device Manager and Unistall your ATI Drivers

Once your done, restart the PC and then try installing the latest drivers.


I had several issues with this in the past, but I overcame it with logical reasoning and whenever I have a driver issue, I just use these steps and I always overcome the problem.

Best of luck! *Toast :toast:

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.