Windows 10: Constant BSOD after 8-12 hours of the computer being turned on.

I can not figure out the reason why my computer is constantly crashing while being turned on. Most of the information i have gathered is that this is either a hardware problem or a driver problem. I have Reinstalled windows 3 times,2 while keeping personal files, 1 clean wipe.Here are the Mini Dump Files.

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD CONSTANT RESTART LOOP

Hi,

This issue might occur due to an old or corrupted graphics driver. Since you are experiencing a constant restart loop, we suggest that you follow the Startup Repair steps below:

• Turn off your computer.
• Turn on your computer. As soon as you see the Windows logo with the spinning dots, press and hold down the power button until your computer turns off. Do this process
  twice.
• Turn on your computer for the third time, and let it load.
• It should give you the message: Preparing Automatic Repair.
• On the next screen that would appear, click on Advanced Options.
• Select Troubleshoot.
• Go to Advanced Options.
• Click on Startup Repair.
• Wait for the repair to finish.

We would appreciate it if you could get back to us and provide us your feedback.

 

KernelBase.dll is broken constant BSOD's constant game crashing.

Hi Darry,

User Profile corruption is one of the possible reasons why you are experiencing constant BSOD's on your computer. You mentioned that you ran the
System File Checker (SFC) tool, but is still getting a stop code. To further troubleshoot the issue, we suggest that you create a new User Profile and check if the issue persists.

To create a user profile, follow these steps:

• Go to Settings. Click Accounts.
• Select Family & other people.
• Select the Add someone else to this PC tab.
• Name the user as Test.
• Leave the password field blank.
• Hit Next.
• Sign in as Test user.

You may also check this link
to fix BSOD errors. Choose the situation when you experienced the problem and follow the troubleshooting steps.