Windows 10: Constant BSOD

Hi death2all110.

The BSOD was caused by b57nd60a.sys which is the driver for Broadcom ethernet adapter.
The only problem is that I can't find any drivers on the motherboard site. More specifically there aren't any drivers available for Windows 10.

Cheers, Boris *Smile

 

The driver would be either through Windows Update or the official site of Broadcom delivered
Driver Reference Table - b57nd60a.

Also check Oracle VM VirtualBox for software updates, or reinstall it or remove it, it is another cause of the crash.

 

I should have known....I had issues on a laptop with win10 insider preview and virtual box. Blue screened due to the network adapter driver interfering. Sonofa.....

Thanks, I'll check it out this evening when I get home from work!

 

Uninstalled Virtual Box and installed the latest driver for the NIC.

Will report back in a few days. Thanks!

 

Arghhh!

 

You are using 2 different memory model and makes, this may be the root cause for you.
This is bad because both have different specs, they run on different latency, voltage and frequency. 1 of them must change because Windows can't handle 2 different specs at the same time, due to this 1 of them will malfunction because it doesn't run on the designed specs and possibly out of range of it (too low).
Code: [Memory Device (Type 17) - Length 34 - Handle 0013h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM1 Bank Locator A1_BANK1 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number BLT8G3D1608ET3LX0. [Memory Device (Type 17) - Length 34 - Handle 0015h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 4096MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM2 Bank Locator A1_BANK2 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number F3-1333C9-4GAO[/quote]

 

[/quote] Oh man....I should have known.....I feel like such a noob.

*Facepalms*

I'll remove the 2 G.Skill 4GB Sticks.

 

Try these emoticons instead of facepalm, I think either of them will fit.
*Doh
*Banghead
Code: :doh: :banghead:[/quote] Let me know how it goes *Smile

 

Let me know how it goes *Smile[/quote] Removed the 2 4GB sticks. Went strong for ~5 Days and got another BSOD. Seems to be TCPIP.Sys so Win10 does not seem to like the driver for my NIC.

Update: Looks Like the driver for my NIC was an old version from 2013 v15. I found an updated driver from 2015 at v17 and was able to force update it to that.

 

According to the dump your network driver wasn't as old as you said, but good move *Smile
Code: 4: kd> lmvm k57nd60a Browse full module list start end module name fffff801`b9e40000 fffff801`b9eb1000 k57nd60a T (no symbols) Loaded symbol image file: k57nd60a.sys Image path: \SystemRoot\System32\drivers\k57nd60a.sys Image name: k57nd60a.sys Browse all global symbols functions data Timestamp: Thu Aug 20 04:16:18 2015 (55D53872) CheckSum: 0006F016 ImageSize: 00071000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote]

 

About your memory I mentioned ~5 days ago.

How it looked like:
Code: [Memory Device (Type 17) - Length 34 - Handle 0011h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM0 Bank Locator A1_BANK0 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number BLS8G3D1609ES2LX0. // Not the same as below, check code below for difference [Memory Device (Type 17) - Length 34 - Handle 0013h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM1 Bank Locator A1_BANK1 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number BLT8G3D1608ET3LX0. // Not the same as above, check code below for difference [Memory Device (Type 17) - Length 34 - Handle 0015h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 4096MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM2 Bank Locator A1_BANK2 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number F3-1333C9-4GAO [Memory Device (Type 17) - Length 34 - Handle 0017h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 4096MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM3 Bank Locator A1_BANK3 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number F3-1333C9-4GAO[/quote] How it looks like NOW in the dumps, the modules are still not the same + they're seated wrong.
You should seat the modules in either in bank 0 and bank 2 or bank 1 and bank 3, I recommend to check the user manual of your motherboard for it.
Code: [Memory Device (Type 17) - Length 34 - Handle 0011h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM0 Bank Locator A1_BANK0 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number BLS8G3D1609ES2LX0. [Memory Device (Type 17) - Length 34 - Handle 0013h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM1 Bank Locator A1_BANK1 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number BLT8G3D1608ET3LX0.[/quote] My sincere apologies for this problem, I thought the BL's were the same because I didn't take a good look
I've just written a small app for checking the part numbers so I won't make the same mistake again.

 

How it looks like NOW in the dumps, the modules are still not the same + they're seated wrong.
You should seat the modules in either in bank 0 and bank 2 or bank 1 and bank 3, I recommend to check the user manual of your motherboard for it.
Code: [Memory Device (Type 17) - Length 34 - Handle 0011h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM0 Bank Locator A1_BANK0 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number BLS8G3D1609ES2LX0. [Memory Device (Type 17) - Length 34 - Handle 0013h] Physical Memory Array Handle 000fh Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 8192MB Form Factor 09h - DIMM Device Set [None] Device Locator A1_DIMM1 Bank Locator A1_BANK1 Memory Type 18h - Specification Reserved Type Detail 4080h - Synchronous Speed 1066MHz Manufacturer Undefined Serial Number Asset Tag Number Part Number BLT8G3D1608ET3LX0.[/quote] My sincere apologies for this problem, I thought the BL's were the same because I didn't take a good look
I've just written a small app for checking the part numbers so I won't make the same mistake again.[/quote] Thanks, I'll look into that.

Also, it appears the BSOD with NTKRNLMP.EXE is back.

Looks like they are indeed 2 different sticks. One is 8-8-8-24 timings and another is 9-9-9-24 timings. I bought the Mobo and sticks used.

Anything I can do?

 

Easy, take a memory kit and seat the kit proper.

The current seated modules aren't the same and are also not seated in the right slots.

 

I think we're finally good.

The BLS8G3D1609ES2lX0 module was bad.

Bought 2 more sticks of BLT8G3D1608ET3LX0.

Plugged the 3 sticks in and system has been stable for well over a week. Uptime is currently 6 days 12 hours, but we had some storms that caused the power to briefly be knocked out. and before that it was ~5 days.

Thanks for all your help! It has been greatly appreciated!

 

*Thumbs

I'm very glad to hear that *Smile