Windows 10: Continuous BSOD Error

I built a custom PC and I'm getting the WHEA_UNCORRECTABLE_ERROR constantly. A SYSTEM_SERVICE_EXCEPTION occurred twice as well. No amount of Google or troubleshooting has helped, but I did stumble upon this site. Below is the link to the MSinfo, system info (from Speccy), and latest 3 DMP files.


https://1drv.ms/f/s!Al8jcC6uA7xBlFyd2RWZhWWanZgg


The reason I assembled a new PC is because the one I built in 2011 and upgraded in 2014 became afflicted with constant DPC_WATCHDOG_VIOLATION and I was thinking that it was finally showing its age. And now this.


The only hardware I cannibalized are:

• Samsung 860 EVO SATA3 SSD

• WD HDD

• Corsair AX 850 PSU & its cables

• Thumb-drive for Windows 10 clean install


Even the case and fans are new for this build. The hard drives were wiped/formatted for this build. I'd like someone more intelligent than me to review the shared files and provide affirmative answers and solutions, as opposed to, "maybe it's the SSD," I'm getting from friends.


Thanks much.

:)

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile