Windows 10: Cumulative Update KB4516045 Windows 10 v1803 Build 17134.1039 Sept.24 Win Update

Brink · Sep 26, 2019

September 24, 2019 - KB4516045 (OS Build 17134.1039)

Applies to: Windows 10 version 1803

The Windows 10 April 2018 Update will reach end of service on November 12, 2019 for Home and Pro editions. We will begin updating devices running the Windows 10 April 2018 Update starting July 16, 2019 to help ensure that these devices remain in a serviced and secure state. For more information, see the Windows 10, version 1903 section of the release information dashboard.

Note Follow @WindowsUpdate to find out when new content is published to the release information dashboard.

Reminder March 12 and April 9 were the last two Delta updates for Windows 10, version 1803. Security and quality updates will continue to be available via the express and full cumulative update packages. For more information on this change please visit our blog.

Starting with update KB4499183, we are introducing functionality that allows you to decide when to install a feature update. You control when you get a feature update while simultaneously keeping your devices up to date. Feature updates that are available for eligible devices will appear in a separate module on the Windows Update page (Settings > Update & Security > Windows Update). If you would like to get an available update right away, select Download and install now. To find out more about this feature, please go to this blog.
When Windows 10 devices are at, or within several months of reaching, end of service, Windows Update will begin to automatically initiate a feature update. This keeps those devices supported and receiving the monthly updates that are critical to device security and ecosystem health.

ePub support ending in Microsoft Edge
Microsoft Edge will end support for e-books that use the .epub file extension over the next several months. For more information, see Download an ePub app to keep reading e-books.

For more information about the various types of Windows updates, such as critical, security, driver, service packs, and so on, please see the following article.

Highlights

Updates an issue that may cause a browser to stop working on certain architectures.

Updates an issue that prevents Microsoft Narrator from opening.

Updates an issue that doesn't provide a cursor when you select a text input box using touch.

Updates an issue that causes excessive CPU usage when you switch applications or hover over the Taskbar.

Improvements and fixes

This non-security update includes quality improvements. Key changes include:

Addresses an issue that may cause a browser to stop working on certain architectures.

Addresses an issue that prevents Microsoft Narrator from opening when the User Account Controls setting is disabled on the Standard User account.

Addresses an issue that fails to provide a cursor when you select a text input element using touch.

Addresses an issue with configuring a lock screen image using a Group Policy. If you have enabled AppLocker DLL rules, the image does not change. Instead, you will get a solid blue background.

Addresses an issue that causes excessive central processing unit (CPU) usage when users switch applications or hover over the Taskbar.

Addresses an issue that prevents an App-V application from opening and displays a network failure error. This issue occurs under certain circumstances, such as when a system's battery is low or there is an unexpected power failure.

Addresses an issue that may not preserve changes to the access control policy when upgrading to a newer version of Windows 10.

Addresses an issue that may cause authentication to fail for certificate-based authentication when the certificate authentication includes a cname as part of the pre-authentication request.

Addresses an issue that prevents a web browser from connecting securely to Windows Server. This occurs when using a client authentication certificate, such as a SHA512-based certificate, and the web browser does not support a signature algorithm that matches the certificate.

Addresses an issue that may cause the Local Security Authority Subsystem Service (LSASS) to stop working with an “0xc0000005” error.

Changes the default setting for BitLocker when encrypting a self-encrypting hard drive. Now, the default is to use software encryption for newly encrypted drives. For existing drives, the type of encryption will not change.

Addresses an issue that prevents the BitLocker recovery key from being successfully backed up to Azure Active Directory.

Addresses a possible compatibility issue when Microsoft Defender Advanced Threat Protection (ATP) accesses case-sensitive Server Message Block (SMB) shares.

Addresses a rare issue that occurs when the mssecflt.sys driver takes too much space on the kernel stack. This results in the error, "STOP 0x7F: UNEXPECTED_KERNEL_MODE_TRAP", and Parameter 1 is set to “EXCEPTION_DOUBLE_FAULT.”

Addresses an issue that leads to excessive memory utilization in Microsoft Defender Advanced Threat Protection (ATP).

Improves the detection accuracy of Microsoft Defender ATP Threat & Vulnerability Management.

Addresses an issue that gives a Windows Hello for Business user two certificates for authentication during certificate renewal instead of one certificate.

Addresses an issue that causes the lsass.exe service to stop working, which causes the system to shut down. This occurs when migrating Data Protection API (DPAPI) credentials using dpapimig.exe with the -domain option.

Addresses an issue that may give write access to a removable USB disk when a user switches from a privileged user to an unprivileged user.

Addresses an issue that prevents you from running the Active Directory Diagnostics Data Collector Set from the Performance Monitor for Domain Controllers. This causes the Data Collector Set name to appear empty. Running the Active Directory Diagnostics Data Collector Set returns the error, “The system cannot find the file specified.” Event ID 1023 is logged with the source as Perflib and the following messages:

“Windows cannot load the extensible counter DLL “C:\Windows\system32\ntdsperf.dll.”

“The specified module could not be found.”

Addresses an issue in GetFinalPathNameByHandleW() that prevents Favorites from opening in Internet Explorer 11. This occurs when Favorites are redirected and offline in a client-side caching scenario with enhanced protected mode compatibility (EPM) enabled.

Addresses an issue with the Origin request header behavior in Internet Explorer when you make cross-origin resource sharing (CORS) requests that use redirected resources in internal subnets.

Allows auditing of security events for clients managed by mobile device management (MDM) for security monitoring and incident response activities.

If you installed earlier updates, only the new fixes contained in this package will be downloaded and installed on your device.

Known issues in this update

Symptom Workaround Certain operations, such as rename, that you perform on files or folders that are on a Cluster Shared Volume (CSV) may fail with the error, “STATUS_BAD_IMPERSONATION_LEVEL (0xC00000A5)”. This occurs when you perform the operation on a CSV owner node from a process that doesn’t have administrator privilege. Do one of the following:

Perform the operation from a process that has administrator privilege.

Perform the operation from a node that doesn’t have CSV ownership.

Microsoft is working on a resolution and will provide an update in an upcoming release. We are investigating reports that a small number of devices may startup to a black screen during the first logon after installing updates. To mitigate this issue, press Ctrl+Alt+Delete, then select the Power button in the lower right corner of the screen and select Restart. Your device should now restart normally.
We are working on a resolution and will provide an update in an upcoming release. After installing this update, Windows Mixed Reality Portal users may intermittently receive a “15-5” error code. In some cases, Windows Mixed Reality Portal may report that the headset is sleeping and pressing “Wake up” may appear to produce no action. To mitigate the issue, use the following steps:

Close the Windows Mixed Reality Portal, if it is running.

Open Task Manager by selecting the Start button and typing “task manager”.

In Task Manager, under the Processes tab, right-click Windows Explorer and select Restart.

Open the Windows Mixed Reality Portal.

We are working on a resolution and will provide an update in an upcoming release. Some Input Method Editor (IME) may become unresponsive or may have high CPU usage. Affected IMEs include Chinese Simplified (ChsIME.EXE) and Chinese Traditional (ChtIME.EXE) with Changjie/Quick keyboard. Due to security related changes in this update, this issue may occur when the Touch Keyboard and Handwriting Panel Service is not configured to its default startup type of Manual. To resolve the issue, perform the following steps:

Select the Start button and type “services”.

Open the Services app and locate Touch Keyboard and Handwriting Panel Service.

Double-click Touch Keyboard and Handwriting Panel Service and select Properties.

Locate Startup type: and change it to Manual.

Select OK.

The TabletInputService service is now in the default configuration and IME should work as expected.
How to get this update

Before installing this update

Microsoft strongly recommends you install the latest servicing stack update (SSU) for your operating system before installing the latest cumulative update (LCU). SSUs improve the reliability of the update process to mitigate potential issues while installing the LCU. For more information, see Servicing stack updates.

If you are using Windows Update, the latest SSU (KB4512576) will be offered to you automatically. To get the standalone package for the latest SSU, search for it in the Microsoft Update Catalog.

Install this update

Release Channel Available Next Step Windows Update or Microsoft Update Yes Go to Settings > Update & Security > Windows Update and select Check for updates. Microsoft Update Catalog Yes To get the standalone package for this update, go to the Microsoft Update Catalog website. Windows Server Update Services (WSUS) No You can import this update into WSUS manually. See the Microsoft Update Catalog for instructions.
File information

For a list of the files that are provided in this update, download the file information for cumulative update 4516045.
Click to expand...

Source: https://support.microsoft.com/en-us/help/4516045

:)

emailx45 · Sep 26, 2019

Cumulative Update KB4457128 Windows 10 v1803 Build 17134.285 Sept. 11

Here, was installed without error!

KB4456655

Cumulative Update KB4457128 Windows 10 v1803 Build 17134.285 Sept. 11

Brink · Sep 26, 2019

Cumulative Update KB4457128 Windows 10 v1803 Build 17134.285 Sept. 11

Update:

Cumulative Update KB4464218 Windows 10 v1803 Build 17134.286 Sept. 17 - Windows 10 Forums

KCR · Sep 26, 2019

Cumulative Update KB4457128 Windows 10 v1803 Build 17134.285 Sept. 11

Same for me. . . (2)

Yes !

Carry on. . . *Smile

Windows 10: Cumulative Update KB4516045 Windows 10 v1803 Build 17134.1039 Sept.24 Win Update

Cumulative Update KB4516045 Windows 10 v1803 Build 17134.1039 Sept.24 Win Update

Cumulative Update KB4516045 Windows 10 v1803 Build 17134.1039 Sept.24 Win Update

Cumulative Update KB4516045 Windows 10 v1803 Build 17134.1039 Sept.24 Win Update

Cumulative Update KB4516045 Windows 10 v1803 Build 17134.1039 Sept.24 Win Update - Similar Threads - Cumulative Update KB4516045

KB4577032 Cumulative Update Windows 10 v1803 Build 17134.1726 Sept. 8

Cumulative Update KB4516061 Windows 10 v1607 Build 14393.3242 Sept. 24 Win Update

Cumulative Update KB4516059 Windows 10 v1703 Build 15063.2078 Sept. 24 Win Update

Cumulative Update KB4516071 Windows 10 v1709 Build 16299.1420 Sept. 24 Win Update

Cumulative Update KB4516077 Windows 10 v1809 Build 17763.774 - Sept.24 Win Update

Cumulative Update KB4522014 Windows 10 v1803 Build 17134.1009 Sept.23 Win Update

Cumulative Update KB4516058 Windows 10 v1803 Build 17134.1006 Sept.10

Cumulative Update KB4458469 Windows 10 v1803 Build 17134.320 Sept. 26

Updates for Windows 10 v1803 (Build 17134) x64

Users found this page by searching for:

MSNS19-09-W10-4516045 for Windows 10 Enterprise (x64) (KB4516045)