Windows 10: DHCP

The IP address lease 192.168.1.3 for the Network Card with network address 0xD89EF326F842 has been denied by the DHCP server 192.168.1.1 (The DHCP Server sent a DHCPNACK message).


Need an explanation on this error

:)

 

The DHCP Server service terminated without a valid clue

Hi Chhetri Suman,

Thank you for writing to Microsoft Community Forums.

DHCP (Dynamic Host Configuration Protocol): Every device on TCP/IP needs unique IP address to access the network. DHCP controls the allotment of IP addresses. However, if
you can access internet, DHCP should work fine. But if there is some issue with the internet, you can follow these steps and resolve the DHCP error.

I suggest you to follow the troubleshooting steps mentioned below:

1. Press Windows and
   R key together on your Keyboard.
   
2. Type Control and hit enter.
   
3. Click on Network and internet > click on Change adapter settings
   on the left pane.
   

4. Right click on the Ethernet connection you are using and select properties.


5. Select Internet protocol version 4 (TCP/IPV4) and click on properties.


6. Check the following radio boxes:

• Obtain an IP address automatically
• Obtain DNS server address automatically

7. Now windows 10 will retrieve the IP address automatically.

Hope it helps.

Roohi Taj S

Microsoft Community - Moderator

 

DHCP-Client IP lease denied event ID 1002

Hi farafalil,

While you wait for the suggestion of the Community members for this thread, I suggest that you post this issue on theTechNet
Forums. The members there include IT professionals that can provide a more advanced recommendation on the next step to resolve your issue.

Regards.

 

PC Cant Obtain a IP Address, Need some advice!

Step 1: Click START button
Step 2: In the Search area, type "regedt32" (of course don't include the ""), right click on the search result and "Run as Administrator".

Step 3: Click on "HKEY_LOCAL_MACHINE", should expand out to a list of stuff
Step 4: Next choose "SYSTEM", should expand again
Step 5: Choose "CurrentControlSet", expands again
Step 6: Choose "Services", expands to a super large list of stuff

Step 7: Click on "Dhcp", the right window will show the files in that folder
Step 8: Double click on "DependOnService"
Step 9: Delete all the words in text area, except "Afd", and click OK. You are done here

Step 10: Next under "Services", look for "EapHost", this should be a few folders below Dhcp Step 11: Same thing, double click on the file "DependOnService"
Step 12: Delete everything in the text are and click OK. You are done.

Now, close everything and RESTART WINDOWS. Your WLan should be back and working once your computer starts. Hope this saves you like it saved me. Thanks to original poster for the wonderful resolution. Your post was almost too obscure to find, but I'm glad this is SOLVED! I'll be spreading the word around to save people from the constant agony of WLAN SVC going balistic every time after a registry cleanup."


THIS^ FIXED IT!! yay thanks everyone!!