Windows 10: Different BSODs during gaming (Rocket League)

Hi everybody.

Since I upgraded from Win7 to Windows 10 last summer, I've had really frustrating BSODs now and then. I mostly use my PC for music production but I'm also playing one single game and that's Rocket League. Since the upgrade, I've had random BSODs when playing the game. However, since 1 week ago, the frequency of the BSODs has risen dramatically. I can now, on average, play the game for 10 mins before it crashes. A couple of times I've had a BSOD randomly when just doing nothing in Windows.

I've run memtest with no problems found. I've also run system file checker with no problems. I've cleaned the inside of the chassi from dust. My CPU temp in Windows is around 30°C and my GPU temp in Windows is around 37°C. I've not checked the temperature when in-game.

I've included the dmp files that Windows has gathered.

My specs are the following:

• ASRock Z77 EXTREME6, ATX
• i7-3770K 3,50 GHz
• 16 Gb RAM (Corsair (4x4096MB) CL9 1600Mhz VENGEANCE LP)
• Asus Radeon R9 280 TOP Direct CU II 3GB DDR5
• 2TB Seagate Barracuda 7200rpm SATA 6Gbit/s
• SSD 120GB Intel 520
• Fractal Design Tesla 550W 80+
• Windows 10 64bit

I would be really grateful for any kind of help!

Thank you.

:)

 

Get BSODs SYSTEM_SERVICE_EXCEPTION, BAD_POOL_HEADER, MEMORY_MANAGEMENT appear in Windows 10

Hi, i dont know why but lately i have been getting a lot of BSODs when im play games such as CSGO, rocket league and dirty bomb. The main BSODs i have gotten are: SYSTEM_SERVICE_EXCEPTION, BAD_POOL_HEADER, MEMORY_MANAGEMENT, IRQL_NOT_LESS_OR_EQUAL, and KERNEL_SECURITY_CHECK_FAILURE.
Is there any way to stop some of these? like buying new hardware or something? Or is it probably just time for me to get a new computer?

Thanks.

 

Rocket league

-

Please read the post

immediately above your post.

Don

 

Code: ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 7A, {1, ffffffffc0000005, ffffc5803ca7f800, fffffd7e9ffc1000} *** WARNING: Unable to verify timestamp for win32k.sys *** ERROR: Module load completed but symbols could not be loaded for win32k.sys Probably caused by : memory_corruption Followup: memory_corruption ---------[/quote] None of the .dmp files are giving me anything concrete to work with.

Please run a minimum of 8 passes of MemTest86+, by following this then report back:
MemTest86+ - Test RAM

 

Thanks for the reply!

I've now run MemTest for 8 passes and no errors found (took 20 hours *chuckle).

None of the .dmp files are giving me anything concrete to work with.

Please run a minimum of 8 passes of MemTest86+, by following this then report back:
MemTest86+ - Test RAM[/quote]

 

OK.

Please do the following:

Run Driver Verifier for 24 hours, or the occurrence of the next crash, whichever is earlier:
Driver Verifier - Enable and Disable in Windows 10

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.