Windows 10: Different BSOD's started again

I had the same issue with BSOD's 3 months ago and had to sent my PC back to manufacturer as I wasn't able to fix it. My processor and motherboard were replaced but now I have started experiencing more issues with BSOD's as they appear in intervals from 10 minutes to many hours of working on my computer. These BSODs usually are something like PAGE_FAULT_ON_NONPAGED_AREA, KERNEL_SECURITY_CHECK_FAILURE, DRIVER_IRQL_LESS_OR_NOT_EQUAL. I will be able to post my DUMP files soon but I want to post this in case I will get one more BSOD.

:)

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile

 

7 different BSoD

First off this is what I went through once I installed them 11.1 drivers . BSOD till I had to reinstall the OS .
It seems that some maybe missing the point here this STARTED for you after you installed the 11.1 drivers and then as it would seem you are getting them after a clean install of the old drivers . Correct ? If so have you wiped the HDD and did a clean install of the OS ?
If not then I would do this before thinking your cards are going out .

 

BSOD issue after fixing another BSOD error

Hi Williams,

There are several reasons why BSOD occur, which has different resolution. To check for any corruption or the integrity of your computer's Windows, we suggest that you perform a
Check Disk by following these steps:

• Type cmd in the search bar.
• Right-click on the Command Prompt, then Run as administrator.
  
• Type chkdsk x: /r, the /r command will fix errors found on the disk.

Let us know if you need further assistance.