Windows 10: Disk error?

Hi guys;I have this error ? how can i fix it? see Pic, thanks

:)

 

Display

Thank you. Worked fine. Why is it buried so deep?

 

Display

My screen goes black after 20 seconds, have to hit a key, how do I correct that in the system.

 

Fill in your system specs please

System Specs - Fill in at Ten Forums

Then we can point you do a disk check for your brand

http://pcsupport.about.com/od/toolso.../tophddiag.htm

 

I think GSmartControl is brand indepentend. This tool would be my recommendation to check the disk and see if any failures listed there.

 

I agree NickTh, I also think the preview should be run either in a dual boot, or a vm. It is a beta and using another OS may show no issue with the disc

 

;Lenovo ThinkCenter71;socket 1155
Intel (core)tm) I5 2400 CPU 3.10GHZ,
Mem 4GB,Socket 1155, Video card ATI 6450, HDD Sata 500.


Also i did this in the ''cmd'' in the terminal ''chkdsk /f'' and it did not reveal any errors,besides this showing sometimes everything is ok

also in Ubuntu 14.04 there is no such error

 

Hi guys; update on the HDD issue; well i change to another Sata HDD,installed Win 7 and then upgraded to win 10 TP and all good,
i really don't like to deal with software or hardware Issues,too much to my head,i always like to go the easier route;
on the other HDD that had the HDD Error failing, i installed Ubuntu14.04 and no error notifications,i keep it as spare,in case i'm not given a free Win 10 RTM.

 

You still "owe" the results of GsmartControl. You can do the same from Ubuntu. Open a terminal and run
Code: sudo apt-get install smartmontools --no-install-recommends sudo smartctl -a /dev/sdX[/quote] Replace X with the actual disk leter (e.g. sda or sdb....).
Post the results here inside

Code:

 tags. Then we can inspect the results and conclude somewhere.
 Thanks.

 

Replace X with the actual disk leter (e.g. sda or sdb....).
Post the results here inside

Code:

 tags. Then we can inspect the results and conclude somewhere.
 Thanks.[/quote]  Thanks; i'll do that on other time when i have the HDD installed on the PC,at this Time i have the original HDD that came with the Lenovo PC from the dealer with Win 10 Tp build 1049 and so far everything running fine.
 
 One question? i used an Iso of win7 that had 30 days to activate and done all updates then upgraded to win 10 tp throughout the update process, by shining up at MS ,everything went smooth and system is running just fine, what are my chances of keeping a copy of Win 10 RTM ? or just be given a cheap legit key?

 

I think nobody can answer this question for sure. I would suggest waiting till June/July, then things will be more clear about the free upgrades.
Thanks.

 

If you didn't activate the OS, it is not a valid OS and you wont get a free upgrade in my opinion. They are giving 10 away to licensed OS's. The cheap legit keys are for valid upgrades, they may be cheap though.

 

*Rolleyes

 

What OS was originally installed on the machine?

I think there were some issues reported with the Intel chipset drivers causing HDD problems. You might try visiting Intel and 'updating' all of the Intel drivers related to your machine.

Can you keep Win10 - not unless you go through legal channels (that's why I asked about the original OS)
Technically you can do whatever you want with your machine .. just don't expect MS or the Designer Media forums (VistaX64, SevenForums, EightForums, TenForums, PC Help) to assist you after Win10 goes RTM when there are issues.

There wasn't any need to install Win7 in 30 day trial mode - you could have just installed Win10 using the ISO after joining the Insider program. Still is was a worthwhile test.

The Technical Preview agreement is a bit different from a licensed product - MS actually wants people to install Win10 to test drive it.

 

Replace X with the actual disk leter (e.g. sda or sdb....).
Post the results here inside

Code:

 tags. Then we can inspect the results and conclude somewhere.
 Thanks.[/quote]  
 === START OF INFORMATION SECTION ===
 Model Family: Seagate Barracuda 7200.10
 Device Model: ST3320620AS
 Serial Number: 9QF78WVQ
 Firmware Version: 3.ADG
 User Capacity: 320,072,933,376 bytes [320 GB]
 Sector Size: 512 bytes logical/physical
 Device is: In smartctl database [for details use: -P show]
 ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
 Local Time is: Tue Apr 14 00:08:11 2015 EDT
 SMART support is: Available - device has SMART capability.
 SMART support is: Enabled
 
 
 === START OF READ SMART DATA SECTION ===
 SMART overall-health self-assessment test result: FAILED!
 Drive failure expected in less than 24 hours. SAVE ALL DATA.
 See vendor-specific Attribute list for failed Attributes.
 
 
 General SMART Values:
 Offline data collection status: (0x82) Offline data collection activity
 was completed without error.
 Auto Offline Data Collection: Enabled.
 Self-test execution status: ( 73) The previous self-test completed having
 a test element that failed and the test
 element that failed is not known.
 Total time to complete Offline 
 data collection: ( 430) seconds.
 Offline data collection
 capabilities: (0x5b) SMART execute Offline immediate.
 Auto Offline data collection on/off support.
 Suspend Offline collection upon new
 command.
 Offline surface scan supported.
 Self-test supported.
 No Conveyance Self-test supported.
 Selective Self-test supported.
 SMART capabilities: (0x0003) Saves SMART data before entering
 power-saving mode.
 Supports SMART auto save timer.
 Error logging capability: (0x01) Error logging supported.
 General Purpose Logging supported.
 Short self-test routine 
 recommended polling time: ( 2) minutes.
 Extended self-test routine
 recommended polling time: ( 107) minutes.
 
 
 SMART Attributes Data Structure revision number: 10
 Vendor Specific SMART Attributes with Thresholds:
 ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate 0x000f 117 073 006 Pre-fail Always - 0
 3 Spin_Up_Time 0x0003 097 094 070 Pre-fail Always - 0
 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 471
 5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 57106
 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 296546108
 9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14608
 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 449
 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 65535
 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
 190 Airflow_Temperature_Cel 0x0022 067 038 045 Old_age Always In_the_past 33 (33 104 34 33 0)
 194 Temperature_Celsius 0x0022 033 062 000 Old_age Always - 33 (0 13 0 0 0)
 195 Hardware_ECC_Recovered 0x001a 076 045 000 Old_age Always - 225328440
 197 Current_Pending_Sector 0x0012 095 094 000 Old_age Always - 116
 198 Offline_Uncorrectable 0x0010 095 094 000 Old_age Offline - 116
 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 4
 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
 202 Data_Address_Mark_Errs 0x0032 055 208 000 Old_age Always - 45
 
 
 SMART Error Log Version: 1
 ATA Error Count: 120 (device log contains only the most recent five errors)
 CR = Command Register [HEX]
 FR = Features Register [HEX]
 SC = Sector Count Register [HEX]
 SN = Sector Number Register [HEX]
 CL = Cylinder Low Register [HEX]
 CH = Cylinder High Register [HEX]
 DH = Device/Head Register [HEX]
 DC = Device Command Register [HEX]
 ER = Error register [HEX]
 ST = Status register [HEX]
 Powered_Up_Time is measured from power on, and printed as
 DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
 SS=sec, and sss=millisec. It "wraps" after 49.710 days.
 
 
 Error 120 occurred at disk power-on lifetime: 14556 hours (606 days + 12 hours)
 When the command that caused the error occurred, the device was active or idle.
 
 
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 01 ae f4 49 e0 Error: UNC at LBA = 0x0049f4ae = 4846766
 
 
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 42 00 01 ae f4 49 e0 00 04:32:41.155 READ VERIFY SECTOR(S) EXT
 42 00 02 ae f4 49 e0 00 04:32:41.146 READ VERIFY SECTOR(S) EXT
 42 00 02 ac f4 49 e0 00 04:32:41.130 READ VERIFY SECTOR(S) EXT
 42 00 04 ac f4 49 e0 00 04:32:39.878 READ VERIFY SECTOR(S) EXT
 42 00 04 a8 f4 49 e0 00 04:32:38.652 READ VERIFY SECTOR(S) EXT
 
 
 Error 119 occurred at disk power-on lifetime: 14556 hours (606 days + 12 hours)
 When the command that caused the error occurred, the device was active or idle.
 
 
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 02 ae f4 49 e0 Error: UNC at LBA = 0x0049f4ae = 4846766
 
 
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 42 00 02 ae f4 49 e0 00 04:32:41.155 READ VERIFY SECTOR(S) EXT
 42 00 02 ac f4 49 e0 00 04:32:41.146 READ VERIFY SECTOR(S) EXT
 42 00 04 ac f4 49 e0 00 04:32:41.130 READ VERIFY SECTOR(S) EXT
 42 00 04 a8 f4 49 e0 00 04:32:39.878 READ VERIFY SECTOR(S) EXT
 42 00 08 a8 f4 49 e0 00 04:32:38.652 READ VERIFY SECTOR(S) EXT
 
 
 Error 118 occurred at disk power-on lifetime: 14556 hours (606 days + 12 hours)
 When the command that caused the error occurred, the device was active or idle.
 
 
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 02 ae f4 49 e0 Error: UNC at LBA = 0x0049f4ae = 4846766
 
 
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 42 00 04 ac f4 49 e0 00 04:32:41.155 READ VERIFY SECTOR(S) EXT
 42 00 04 a8 f4 49 e0 00 04:32:41.146 READ VERIFY SECTOR(S) EXT
 42 00 08 a8 f4 49 e0 00 04:32:41.130 READ VERIFY SECTOR(S) EXT
 42 00 08 a0 f4 49 e0 00 04:32:39.878 READ VERIFY SECTOR(S) EXT
 42 00 10 b0 f4 49 e0 00 04:32:38.652 READ VERIFY SECTOR(S) EXT
 
 
 Error 117 occurred at disk power-on lifetime: 14556 hours (606 days + 12 hours)
 When the command that caused the error occurred, the device was active or idle.
 
 
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 02 ae f4 49 e0 Error: UNC at LBA = 0x0049f4ae = 4846766
 
 
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 42 00 08 a8 f4 49 e0 00 04:32:41.155 READ VERIFY SECTOR(S) EXT
 42 00 08 a0 f4 49 e0 00 04:32:41.146 READ VERIFY SECTOR(S) EXT
 42 00 10 b0 f4 49 e0 00 04:32:41.130 READ VERIFY SECTOR(S) EXT
 42 00 10 a0 f4 49 e0 00 04:32:39.878 READ VERIFY SECTOR(S) EXT
 42 00 20 a0 f4 49 e0 00 04:32:38.652 READ VERIFY SECTOR(S) EXT
 
 
 Error 116 occurred at disk power-on lifetime: 14556 hours (606 days + 12 hours)
 When the command that caused the error occurred, the device was active or idle.
 
 
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 02 ae f4 49 e0 Error: UNC at LBA = 0x0049f4ae = 4846766
 
 
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
 -- -- -- -- -- -- -- -- ---------------- --------------------
 42 00 10 a0 f4 49 e0 00 04:32:36.061 READ VERIFY SECTOR(S) EXT
 42 00 20 a0 f4 49 e0 00 04:32:36.060 READ VERIFY SECTOR(S) EXT
 42 00 20 80 f4 49 e0 00 04:32:36.058 READ VERIFY SECTOR(S) EXT
 42 00 40 80 f4 49 e0 00 04:32:39.878 READ VERIFY SECTOR(S) EXT
 42 00 40 40 f4 49 e0 00 04:32:38.652 READ VERIFY SECTOR(S) EXT
 
 
 SMART Self-test log structure revision number 1
 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
 # 1 Short captive Completed: unknown failure 90% 14546 16453020
 # 2 Short offline Completed: unknown failure 90% 14546 325795665
 # 3 Short offline Completed: unknown failure 90% 14546 171868828
 # 4 Short offline Completed: unknown failure 90% 14388 33069049
 # 5 Short captive Completed: unknown failure 90% 14388 16453020
 # 6 Short offline Completed without error 00% 0 -
 
 
 SMART Selective self-test log data structure revision number 1
 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
 1 0 0 Not_testing
 2 0 0 Not_testing
 3 0 0 Not_testing
 4 0 0 Not_testing
 5 0 0 Not_testing
 Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
 If Selective self-test is pending on power-up, resume after 0 minute delay.
 
 
 frank@frank-ThinkCentre-M71e:~$