Windows 10: Display Adapter or Monitor issue after replacing notebook screen

Discus and support Display Adapter or Monitor issue after replacing notebook screen in Windows 10 Graphic Cards to solve the problem; Hi all, I've replaced my broken notebook screen a couple of days ago with the correspondent available model and since then I basically can't use it... Discussion in 'Windows 10 Graphic Cards' started by ZTH27, Dec 12, 2019.

  1. ZTH27 Win User

    Display Adapter or Monitor issue after replacing notebook screen


    Hi all,

    I've replaced my broken notebook screen a couple of days ago with the correspondent available model and since then I basically can't use it except when forcing Microsoft Basic Display Adapter driver to be installed instead of the latest version of the previously installed Intel UHD Graphics 620.

    I'm an experienced user so I've disabled, uninstalled, reinstalled etc. all possible drivers and combinations but every time that this - I believe correct - driver is installed the screen goes black and I can only work with my external monitor (connected via HDMI).

    I know the primary display is ON because it's detected on Advanced Display, but the resolution is wrongly detected and impossible (?) to change.

    Important note: I had a BOE NV156FHM-N35 screen and I've replaced it with the same but more recent version BOE NV156FHM-N45, exactly same specs, connection type, etc. I thought it shouldn't be a problem.

    Long story short, if using Microsoft Basic Display Adapter driver, the computer can't recognize anything else connected via HDMI, if using the latest Intel UHD Graphics 620 driver, the primary monitor doesn't show any image.

    On the other hand I actually believe this may be also an issue related with the wrongly detected "Active Signal Resolution". Here's why:


    Display Adapter or Monitor issue after replacing notebook screen [​IMG]


    ...and also...


    Display Adapter or Monitor issue after replacing notebook screen [​IMG]


    My screen should display 1920x1080 and that is never shown. Which leads me to this surely related issue which is the fact that the "Monitor" on Device Manager is constantly being reset to this:


    Display Adapter or Monitor issue after replacing notebook screen [​IMG]



    Any helpful ideas? Thank you so much.

    Dell Inspiron 7570 / Windows 10 / Windows Version 1909

    :)
     
    ZTH27, Dec 12, 2019
    #1
  2. Roohi_Taj Win User

    Issue with connecting Dual monitor with Wireless Display Adapter

    Hi Penny Wells,

    Thank you for writing to Microsoft Community Forums.

    I can understand the situation must be difficult for you when things do not work as they should. However, we would need some more information regarding the issue.

    1. What is the make and model of the computer?
    2. What is the model of the TV?

    This issue can occur if there is pending firmware update or the issue with the drivers. I would suggest you to follow the below steps and let us know about the results:

    Method 1: Fix connections to wireless displays or docks.


    I would suggest you to follow the steps mentioned in the Microsoft article on
    Fix connections to wireless displays or docks.


    Method 2: Troubleshooting Wireless Display Adapters.

    If method 1 doesn’t fix the issue, I would suggest you to follow all the troubleshooting steps mentioned in the Microsoft article on
    Troubleshooting Wireless
    Display Adapters
    refer the steps ‘Having trouble connecting your device to the adapter?’

    Note: The above article contains steps regarding Firmware update.
    Modifying BIOS settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of BIOS/CMOS
    settings can be solved. Modifications of the settings are at your own risk.

    If you would like me to provide additional advice, simply respond to this thread. I will get notified and I’ll reply to you as soon as I can.

    Hope it helps.

    Roohi Taj S

    Microsoft Community - Moderator
     
    Roohi_Taj, Dec 12, 2019
    #2
  3. Issue with black screen, dual display, ATI Integrated GPU

    Hi,

    I suggest you to follow the below methods and check if it helps.

    Method 1: I suggest you to go to device manager and disable the display drivers, check whether the issue persists or not.

    • Press Windows + X keys and click
      Device manager.
    • Click to expand Display adapters, right click the second adapter and click
      Disable.
    • Restart the computer and check whether the issue persists or not.
    • Repeat the same steps to disable the first display adapter and check if it helps.

    If you find the issue is with anyone of the display adapters then, I suggest you to update the display drivers from the manufactures website for Windows 10 and check if it helps.

    Method 2: I suggest you to follow the steps form the below article for
    “Black Screen” issues and check if it helps.

    Troubleshoot black screen problems

    http://windows.microsoft.com/en-us/windows-10/troubleshoot-black-screen-problems

    Please get back to us with an update on this issue, we will be happy to assist you further.

    Thank you
     
    Karthicka_R, Dec 12, 2019
    #3
  4. Display Adapter or Monitor issue after replacing notebook screen

    Taskbar displaying in an incorrect position when using scaling on a dual monitor setup

    Hi Jav,

    Thank you for posting in Microsoft Community and being a part of Windows 10.

    I understand the inconvenience you are facing in accessing the display on dual monitor. Do not worry will help you with this issue.

    Do let us know the make and model of your device?

    This issue might have occurred due to display drivers. Try the below troubleshooting steps and check if it helps.

    Step 1: I suggest you to update the display drivers and check if the issue persists.

    Steps to Update Graphics Driver.

    • Press Windows key + X key when you are at desktop.
    • Select Device Manager.
    • Expand Display Adapter.
    • Right click on the Display Adapter and click on
      Update driver software.

    Step 2: I suggest you to install all the pending updates on Windows 10.

    • Connect to the internet.
    • Press Windows key and type
      updates
      .
    • Click on Check for updates.
    • Under Windows Updates, click on
      Check for updates.
    • Try to install the updates being shown.

    Also, check if the issue persists on 100% screen resolution as well.

    Hope it helps. Get back to us with an updated status of this issue for further assistance.
     
    Deepika Gowda, Dec 12, 2019
    #4
Thema:

Display Adapter or Monitor issue after replacing notebook screen

Loading...
  1. Display Adapter or Monitor issue after replacing notebook screen - Similar Threads - Display Adapter Monitor

  2. Monitor display issues

    in Windows 10 Drivers and Hardware
    Monitor display issues: Some months ago, I bought a new monitor (1080p, 144Hz), which I've been using as my primary, while using my old one (1080p, 60Hz) as secondary. However, there have been 3 issues I've found with my new monitor and I'm not sure what's causing it or what to do with it. First...
  3. Changing display adapter for monitor

    in Windows 10 Drivers and Hardware
    Changing display adapter for monitor: My question In the device manager, as well as in the Advanced Screen Settings, Windows tell me that my external monitor is connected to/run by the least powerful of the two graphics cards in my laptop namely the Intel UHD Graphics 620, my integrated GPU, but I wan't to...
  4. Display Adapter issue after replacing defective notebook screen

    in Windows 10 Drivers and Hardware
    Display Adapter issue after replacing defective notebook screen: Hi, I've replaced my broken notebook screen a couple of days ago and since then I can't use it except when forcing Microsoft Basic Display Adapter driver to be installed instead of the latest version of the previously installed Intel UHD Graphics 620. I disabled,...
  5. Display Adapter issue on a newly replaced Dell notebook screen

    in Windows 10 Drivers and Hardware
    Display Adapter issue on a newly replaced Dell notebook screen: Hello, I've accidentally broken my notebook screen last week and I've bought the same model in order to replace it myself (since I know how to do it), but because it's no longer under production I was given the same "replacement" model from the manufacturer, which makes...
  6. Microsoft Display Adapter Issues

    in Windows 10 Software and Apps
    Microsoft Display Adapter Issues: I have been having issues with a few aspects of this app. 1. When I open up the action center and click on connect, the action center disappears and nothing happens no matter how long you wait. 2. When I go into my settings and click on system settings, the settings app...
  7. Microsoft Basic Display Adapter *BLACK SCREEN* issue

    in Windows 10 Drivers and Hardware
    Microsoft Basic Display Adapter *BLACK SCREEN* issue: Hello :) I did a clean reinstall of windows 10 64 bit on my Lenovo Y520, everything was okay until I had to update my Microsoft Basic Display Adapter to Intel Graphics 630, after this update my screen went black and can only be fixed if I boot in safe mode and roll back the...
  8. Issue with connecting Dual monitor with Wireless Display Adapter

    in Windows 10 Drivers and Hardware
    Issue with connecting Dual monitor with Wireless Display Adapter: Adapter installed in my Windows 10 Pro laptop. TV screen display "Ready for Connection". Both Adapter and TV listed in My Devices ("Unconnected") Action Center does not list either device to allow Connection. (Firewall allows both Private and Public use) ***Modify...
  9. Basic Display Adapter Issue

    in Windows 10 Drivers and Hardware
    Basic Display Adapter Issue: I have a problem with my newly upgraded old laptop to windows 10 pro. The display is not good, the video is fragmented and sometimes freezing. I have checked all the drivers in the device manager and updated all but still no changes. In the display adapter the driver is named...
  10. Display adapter not being recognised, black screen issue.

    in Windows 10 Graphic Cards
    Display adapter not being recognised, black screen issue.: Hi all, Upon upgrading to w10 I encountered the black screen issue. When plugging in another screen to the HDMI adapter on my laptop the display appears working perfectly. The laptop screen only shows anything during boot, as soon as the system starts it sits with a black...