Windows 10: Display configuration issue

New HP Pavilion 595 DT PC connected for first time to older HP 2310m monitor displays images/screen shots that exceed the boundaries of the 23 inch monitor so that the full image of any screen shot of any open app is incomplete and program icons at bottom of screen are inaccessible. Is this an issue that is fixable through Settings or Microsoft updates?

:)

 

second display configuration issue


Hi All,

My configuration:

Windows 10 Pro x64
AMD Radeon HD 7800

Latest updates and video drivers installed, no hardware changes for 2+ months, latest significant Windows update 2 weeks ago, latest AMD video driver installed at least a week ago.


I have 2 identical displays connected via DVI to Windows PC over several years already with "Extend displays" configuration, and suddenly this configuration stopped working a couple of days ago when I was in the middle of doing something. Windows just replaced it with "Duplicate displays" configuration.


During PC startup I see BIOS diagnostics on both displays. Windows detects 2 displays. "Show only on 1" and "Show only on 2" options work as expected.


Problem: "Extend these displays" results in display 1 going blank and display 2 shows it's part of the image.


AMD Eyefinity (which creates virtual desktop over several monitors) works fine - which suggests that problem maybe only with Windows configuration.


What is done:

• checked cables
• removed and installed again latest AMD drivers
• removed second display from the System Devices, refreshed hardware list and added display again - now I have "Generic PnP monitor" and monitor with correct name in Monitors section
• searched for latest drivers for monitors and display adapters from Device Manager, nothing found

Next I replaced one monitor with monitor from different manufacturer, and everything works as expected - "Extend these displays" configuration shows extended image.


Any ideas what else can be done to fix the problem?


Thank you in advance.

 

is there any demand for a system configurator?

Processor(V) <--drop down arrow
-AMD(V)
--Socket(V)
---AM2(V)
----List of cpu's
---939(V)
----List of CPU's
-Intel(V)
--Socket(V)
---775(V)
----List of cpu's
---771(V)
----List of CPU's


etc etc.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.