Windows 10: Display on PC

Hi!

I have a problem with the display on my PC, I'm not able to adjust the brightness on my laptop and I also can't use the blue light blocker. I'm not sure what the problem is or how to solve it. I've tried turning my laptop off and then back on but nothing changed.

:)

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Microsoft Display Adapter not getting connected to PC

Hi,

Thank you for posting your response.

I would suggest that you follow the steps below and check if you can find the adapter in Device Manager.

1. Right click on the Start Menu and then click on Device Manager.

2. From the list of Hardware, find the Microsoft Display Adapter and check if you can find the device in question.

I would also suggest that you follow the troubleshooting steps provided in the first link and check if it helps.

Vanessa