Windows 10: DNS fixed to the first one.

I am trying the pihole on my raspberry pi. this is a local dns and can ban the ads from the internet.I want to figure out what will happen if the raspberry pi shutdown. Will windows works when the dns change? Therefore i set the dns like thisp.s.i have'nt change anything other than dnsThen I turn off the local dns. Then the network just fail down and have not change to another one. The problem finder say my dns goes wrong. I want it function like: it will be the ads blocker for all my device when the raspberry pi turn on and use google dns when i shutdown the raspberry pi.Have I do something

:)

 

DNS problems with router

A couple suggestions I have for you:

Update the firmware on the router. Maybe it's getting into a badstate, and a firmware update might fix it. Or if you're comfortable with it, install a custom firmware like dd-wrt. Just make sure its supported on your router first.

Change your DNS to: 8.8.8.8, 4.2.2.1. Might help.

If none of these work, maybe statically set your DNS on your PS3/PC to the IPs you listed, taking the router out of the lookup procedure.

Last option, is look for a new router.

 

DNS Servers

So far, it seems like I got it fixed. I disabled Advanced DNS Service and DNS Relay. I put in the two DNS server IPs I listed above into the internet configuration and rebooted it.

 

dns probe finished no internet


Hi Oxide,

After some trial-and-error testing of all suggested fixes, which I found over the internet, here’re what worked for me to solve "DNS Probe Finished No Internet" issue and might work for you as well.

Method 1: Change Default DNS Address to Open DNS

Here all you have to do is change your default automatically obtained DNS server addresses to open DNS or Google DNS. To do this, follow below mentioned steps:

Step 1: Right click on Network icon located in Windows Task Bar Menu.

Step 2: Click on ‘Open Network and Sharing Center.’





Step 3: Click on Local Area Connection with whom who are presently connected and click onProperties.

Step 4: Select ‘Internet Protocol Version 4 (TCP/IPv4)’ and click on Properties.

Step 5: Now in newly opened windows, select the radio button that reads ‘Use the following DNS server address:’

Step 6: Now in the ‘Preferred DNS Server’ box type in 208.67.222.222 and in ‘Alternate DNS Server’ type in 208.67.220.220.

Step 7: Now check the box that says ‘Validate settings upon exit’ and then click on OK. That’s it.