Windows 10: DNS probe finished no internet

Hi guys I am having problems with wifi on my laptop for som time now.

My wireless is disconecting few seconds after connecting to it. I tried many different things (among them is reinstalling windows which helped for few weeks). I googled in many hours and none of tips from google helped.


I get connected to wifi and maybe open one or two websites and after that i get yellow triangle on wifi icon and message "NO internet access". Google chrome gives me error: DNS_PROBE_FINISHED_NO_INTERNET, while Microsoft Edge gives me error: The DNS name does not exist. Error Code: INET_E_RESOURCE_NOT_FOUND


I have tried restarting my modem and router (although all other devices work fine) it didn't help.

I have tried flushing dns, changing dns to google dns, downloading newer drivers for wifi card and windows can not turn off wifi card to save electricity.

I use Windows 10 with Realtek RTL8723BE Wireless LAN 802.11n PCI-E NIC and laptop is Asus X541UA, any tips?

:)

 

dns probe finished no internet


Hi Oxide,

After some trial-and-error testing of all suggested fixes, which I found over the internet, here’re what worked for me to solve "DNS Probe Finished No Internet" issue and might work for you as well.

Method 1: Change Default DNS Address to Open DNS

Here all you have to do is change your default automatically obtained DNS server addresses to open DNS or Google DNS. To do this, follow below mentioned steps:

Step 1: Right click on Network icon located in Windows Task Bar Menu.

Step 2: Click on ‘Open Network and Sharing Center.’





Step 3: Click on Local Area Connection with whom who are presently connected and click onProperties.

Step 4: Select ‘Internet Protocol Version 4 (TCP/IPv4)’ and click on Properties.

Step 5: Now in newly opened windows, select the radio button that reads ‘Use the following DNS server address:’

Step 6: Now in the ‘Preferred DNS Server’ box type in 208.67.222.222 and in ‘Alternate DNS Server’ type in 208.67.220.220.

Step 7: Now check the box that says ‘Validate settings upon exit’ and then click on OK. That’s it.

 

DNS PROBE FINISHED NO INTERNET

Hi,



I apologize for the delayed response. It must be unfortunate that you are still facing the same issue. Let me help you.



As a work around, I suggest you to go through the below troubleshooting steps.

• 
  Open Command Prompt with Admin Rights.
  
• 
  Copy and paste the following commands one by one (in the same sequence).
  
  ipconfig /release
  
  ipconfig /all
  
  ipconfig /flushdns
  
  ipconfig /renew
  
  
  
  netsh int ip set dns
  
  netsh winsock reset
  
  
  
• 
  Restart the system.
  

I hope the issue will be resolved. If you have any further queries, please feel free to contact us again. We will be happy to assist you accordingly.

Thank you.

 

dns probe finished nxdomain??

Hi,

To better assist you, provide the following information:

• Are you trying to access a specific website?
• Is it the same "...DNS address could not be found." message when you try to visit other websites?
  
• Have you tried using another browser?

We suggest that you configure the DNS server addresses.

Here's how:

• Open Control Panel by pressing Windows +
  X, and then select Control Panel.
• Click on Network and Internet.
• Click on Network and Sharing Center.
• On the right pane, click Change adapter settings.
• Right-click on your internet device, either WiFi or Ethernet, and then select
  Properties.
• Select Internet Protocol Version 4.
  
  
  
  
  
• Select Use the following DNS server addresses, and then type in the following:
  
  Preferred DNS server: 208.67.222.222
  
  Alternate DNS server: 208.67.220.220
  
  
  
  
  
• And then click OK.

Regards.