Windows 10: Does fully fresh installing windows from a boot USB change hardware serials/ids?

I’m looking to change all my serial numbers/guids/ids in my pc.Would fully reinstalling windows from fresh by wiping the drives and then Installing using a boot drive reset/change all ids? Such as, cpu, motherboard, gpu etc.Thanks

:)

 

Fresh USB Windows 10 Install - Failing

I am trying to install a fresh copy (reformatted the hard disk) of windows 10 using a USB

• Created an installation media on a USB flash drive (Win 10 pro) from this page https://www.microsoft.com/en-us/software-download/windows10
• Changed the boot order on the other PC so that it boots using USB
• Selected custom install
• Installing Windows goes through the following steps successfully: Copying Windows Files, Getting Files ready for installation, Installing features, Installing updates and before the last step (Finishing up), it restarts
• Then it goes back to the start of the installation steps

I am stuck and have read numerous posts but don't know what to do to install a fresh copy of Win 10.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

windows problems with usb mic

Hi Dave,

Thank you for posting your query in Microsoft Community.

I suggest you to run the Hardware Troubleshooter by following the steps provided below and check if the issue persists.

Method 1:

• 
  Type “Troubleshooting” on the search bar.
  
• 
  Click on troubleshooting, then click on “Hardware and sound”.
  
• 
  Under Hardware and sound, click on “hardware and devices”.
  
• 
  A pop-up will appear, click on the “Next” button and your hardware troubleshooting will start.
  

Method 2: Disable and re-enable all the
Universal Serial Bus controllers (USB) controllers.

The USB controllers represent the USB ports in Device Manager.

To disable and re-enable the USB controllers, follow these steps:

• 
  Press Windows key + X, Click on
  Device Manager.
  
• 
  Expand Universal Serial Bus controllers.
  

• 
  Right-click the first USB controller under Universal Serial Bus controllers, and then click
  Uninstall to remove it.
  
• 
  Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
  
• 
  Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
  

Regards.