Windows 10: Dpc_watchdog_latency bsod error

Processing...x

100%x​

 

Please post the information on the ESET 5 infected files.
Between normal boot and clean boot is selective boot.
One or more of the non-Microsoft services by viewing the latency software (before and after) has had an impact on some of the numbers.
And one of the non-Microsoft services has impacted the keyboard short cuts.
The automatic driver update software program can install problematic drivers.
The malware found by ESET: were they trojans, pup's, rootkits? What was done with the files reported?
The ideal situation to check the hardware is to install fresh software so all of the confounding problems are reduced or eliminated.
If you cannot do a clean install at this time the next best thing is an in place upgrade repair using the windows 10 iso. This should replace any needed windows dll files.
Using control panel uninstall Malwarebytes
Use only Windows defender.


Code: ffffa500`2f919520 fffff803`79793960Unable to load image \SystemRoot\system32\drivers\MBAMChameleon.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for MBAMChameleon.sys *** ERROR: Module load completed but symbols could not be loaded for MBAMChameleon.sys MBAMChameleon+0x23960[/quote]

 

Is there anyway for me to reinstall a fresh windows copy and easily get it back to the state that its currently in?

 

There are different third party software vendors that make imaging software.
If you can only save files and install a new version of Windows you reduce problems with the return of questionable drivers.
Macrium is frequently used on Ten Forums and it has been used most often to rescue failed boots.
Macrium creates an image of the drive and when you repair using the image you unfortunately lose applications.
So there is no full proof method to get everything restored as it once was.
There are different versions of Macrium: Macrium Software | Your image is everything
Macrium Reflect KnowledgeBase - KnowledgeBase v7 - Macrium Reflect Knowledgebase - KnowledgeBase v7 - Macrium Reflect Knowledgebase
http://updates.macrium.com/reflect/v...df?src=sidebar
When considering time and the trade offs: continue troubleshooting with unknown drivers and malware history versus clean install then testing you may find one of the choices to more efficient and effective.
Please post information about the ESET malware.

 

Imaging software, like Macrium Reflect, take all data from selected partitions and make an image of it. If this image is restored you restore everything that was on selected partitions. This includes applications.

 

Im confused, as zbook says that I would lose my applications, and axe0 says that I will retain them?

 

Can I use Macrium Reflect to move my installed software to a new machine - KnowledgeBase - Macrium Reflect Knowledgebase

 

naseemessa, I'm saying you will retain them when you backup the entire partition. Zbook is saying that one can't backup programs solely without anything else.

The only way to get back to the state you're currently in, without problems, is by performing a clean install and manually restore personal files & reinstall programs.

 

Hi. I reinstalled Windows using the option to keep my personal files, yet LatencyMon still picks up latency.

 

____________________________________________________________________________________________________ _____
CONCLUSION
____________________________________________________________________________________________________ _____
Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One or more DPC routines that belong to a driver running in your system appear to be executing for too long. Also one or more ISR routines that belong to a driver running in your system appear to be executing for too long. At least one detected problem appears to be network related. In case you are using a WLAN adapter, try disabling it to get better results. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates.
LatencyMon has been analyzing your system for 0:04:58 (h:mm:ss) on all processors.


____________________________________________________________________________________________________ _____
SYSTEM INFORMATION
____________________________________________________________________________________________________ _____
Computer name: DESKTOP-FIRKJTV
OS version: Windows 10 , 10.0, build: 15063 (x64)
Hardware: GL553VD, ASUSTeK COMPUTER INC.
CPU: GenuineIntel Intel(R) Core(TM) i5-7300HQ CPU @ 2.50GHz
Logical processors: 4
Processor groups: 1
RAM: 16234 MB total


____________________________________________________________________________________________________ _____
CPU SPEED
____________________________________________________________________________________________________ _____
Reported CPU speed: 2496 MHz

Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.


____________________________________________________________________________________________________ _____
MEASURED INTERRUPT TO USER PROCESS LATENCIES
____________________________________________________________________________________________________ _____
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.

Highest measured interrupt to process latency (µs): 5122.467843
Average measured interrupt to process latency (µs): 6.650679

Highest measured interrupt to DPC latency (µs): 5108.519108
Average measured interrupt to DPC latency (µs): 2.469288


____________________________________________________________________________________________________ _____
REPORTED ISRs
____________________________________________________________________________________________________ _____
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.

Highest ISR routine execution time (µs): 2120.967147
Driver with highest ISR routine execution time: Wdf01000.sys - Kernel Mode Driver Framework Runtime, Microsoft Corporation

Highest reported total ISR routine time (%): 0.005256
Driver with highest ISR total time: Wdf01000.sys - Kernel Mode Driver Framework Runtime, Microsoft Corporation

Total time spent in ISRs (%) 0.006214

ISR count (execution time <250 µs): 14264
ISR count (execution time 250-500 µs): 0
ISR count (execution time 500-999 µs): 1
ISR count (execution time 1000-1999 µs): 0
ISR count (execution time 2000-3999 µs): 1
ISR count (execution time >=4000 µs): 0


____________________________________________________________________________________________________ _____
REPORTED DPCs
____________________________________________________________________________________________________ _____
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.

Highest DPC routine execution time (µs): 2569.334936
Driver with highest DPC routine execution time: tcpip.sys - TCP/IP Driver, Microsoft Corporation

Highest reported total DPC routine time (%): 0.040210
Driver with highest DPC total execution time: ndis.sys - Network Driver Interface Specification (NDIS), Microsoft Corporation

Total time spent in DPCs (%) 0.187868

DPC count (execution time <250 µs): 305714
DPC count (execution time 250-500 µs): 0
DPC count (execution time 500-999 µs): 24
DPC count (execution time 1000-1999 µs): 0
DPC count (execution time 2000-3999 µs): 23
DPC count (execution time >=4000 µs): 0


____________________________________________________________________________________________________ _____
REPORTED HARD PAGEFAULTS
____________________________________________________________________________________________________ _____
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.


Process with highest pagefault count: none

Total number of hard pagefaults 0
Hard pagefault count of hardest hit process: 0
Highest hard pagefault resolution time (µs): 0.0
Total time spent in hard pagefaults (%): 0.0
Number of processes hit: 0


____________________________________________________________________________________________________ _____
PER CPU DATA
____________________________________________________________________________________________________ _____
CPU 0 Interrupt cycle time (s): 4.918379
CPU 0 ISR highest execution time (µs): 2120.967147
CPU 0 ISR total execution time (s): 0.073349
CPU 0 ISR count: 14100
CPU 0 DPC highest execution time (µs): 2569.334936
CPU 0 DPC total execution time (s): 1.734416
CPU 0 DPC count: 251021
____________________________________________________________________________________________________ _____
CPU 1 Interrupt cycle time (s): 1.865149
CPU 1 ISR highest execution time (µs): 59.464744
CPU 1 ISR total execution time (s): 0.000719
CPU 1 ISR count: 166
CPU 1 DPC highest execution time (µs): 518.248397
CPU 1 DPC total execution time (s): 0.112599
CPU 1 DPC count: 14201
____________________________________________________________________________________________________ _____
CPU 2 Interrupt cycle time (s): 1.970864
CPU 2 ISR highest execution time (µs): 0.0
CPU 2 ISR total execution time (s): 0.0
CPU 2 ISR count: 0
CPU 2 DPC highest execution time (µs): 2517.676282
CPU 2 DPC total execution time (s): 0.131952
CPU 2 DPC count: 16346
____________________________________________________________________________________________________ _____
CPU 3 Interrupt cycle time (s): 2.943334
CPU 3 ISR highest execution time (µs): 0.0
CPU 3 ISR total execution time (s): 0.0
CPU 3 ISR count: 0
CPU 3 DPC highest execution time (µs): 2548.349359
CPU 3 DPC total execution time (s): 0.260422
CPU 3 DPC count: 24193
____________________________________________________________________________________________________ _____

New Results.

 

Okay, I reset Windows completely, wiping my personal files on C Drive, and ran LatencyMon again. Here are more results
Attachment 145188Attachment 145189

I am seriously confused, what could the issue be?

 

As some additional findings, I have noticed that when the dialog box sound plays, I can hear a popping sound from the speakers presumably, and speedtest.net results have showed that Im only getting 50% of my line speed on my laptop. I have tested the internet speed on other devices, and they get the full speed, its only the laptop thats a problem.

 

Hi naseemessa,

The malware scans show results of cracks.

In order for us to continue, please remove all piracy related stuff from your system and visit AntiVirus, Firewalls and System Security - Windows 10 Forums for a thorough scan.

Until everything is removed we cannot provide anymore support.

We are aware that you performed a reset, but you choose to reset and keeping personal files. The malware scans show that there were / may still be cracks in personal folders.

 

No, Ive done another reset that doesnt include my personal files. Wiped completely with a new install of Windows on C drive.

 

Missed that post *Redface

However, I still recommend to visit the AV forum. We do not know if something nasty came to your system that cannot be removed by wiping a drive.

In latencymon, click on 'Total execution' tab in the first screenshot of post Dpc_watchdog_latency bsod error - Page 4 - Windows 10 Forums, make a screenshot of latencymon and post it.